数据搜索系统,热门电子元器件搜索 |
|
STD55NH2LL 数据表(PDF) 9 Page - STMicroelectronics |
|
STD55NH2LL 数据表(HTML) 9 Page - STMicroelectronics |
9 / 16 page STD55NH2LL - STD55NH2LL-1 Appendix A 9/16 4 Appendix A The power losses associated with the FETs in a synchronous buck converter can be estimated using the equations shown in the table below. The formulas give a good approximation, for the sake of performance comparison, of how different pairs of devices affect the converter efficiency. However a very important parameter, the working temperature, is not considered. The real device behavior is really dependent on how the heat generated inside the devices is removed to allow for a safer working junction temperature. ● The low side (SW2) device requires: ● Very low RDS(on) to reduce conduction losses ● Small Qgls to reduce the gate charge losses ● Small Coss to reduce losses due to output capacitance ● Small Qrr to reduce losses on SW1 during its turn-on ● The Cgd/Cgs ratio lower than Vth/Vgg ratio especially with low drain to source ● voltage to avoid the cross conduction phenomenon; ● The high side (SW1) device requires: ● Small Rg and Ls to allow higher gate current peak and to limit the voltage feedback on the gate ● Small Qg to have a faster commutation and to reduce gate charge losses ● Low RDS(on) to reduce the conduction losses. Figure 19. Buck converter: power losses estimation |
类似零件编号 - STD55NH2LL_06 |
|
类似说明 - STD55NH2LL_06 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |