数据搜索系统,热门电子元器件搜索 |
|
TPA302DG4 数据表(PDF) 2 Page - Texas Instruments |
|
TPA302DG4 数据表(HTML) 2 Page - Texas Instruments |
2 / 22 page www.ti.com ABSOLUTE MAXIMUM RATINGS DISSIPATION RATING TABLE RECOMMENDED OPERATING CONDITIONS DC ELECTRICAL CHARACTERISTICS TPA302 SLOS174C – JANUARY 1997 – REVISED JUNE 2004 This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. AVAILABLE OPTIONS PACKAGED DEVICES TA SMALL OUTLINE(1) (D) –40 °C to 85°C TPA302D (1) The D packages are available taped and reeled. To order a taped and reeled part, add the suffix R (e.g., TPA302DR) over operating free-air temperature range (unless otherwise noted)(1) UNIT VDD Supply voltage 6 V VI Input voltage –0.3 V to VDD + 0.3 V Continuous total power dissipation Internally limited (see Dissipation Rating Table) TJ Operating junction temperature range –40 °C to 150° C Tstg Storage temperature range –65 °C to 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. TA ≤ 25°C DERATING FACTOR TA = 70°C TA = 85°C PACKAGE POWER RATING ABOVE TA = 25°C POWER RATING POWER RATING D 731 mW 5.8 mW/ °C 460 mW 380 mW MIN MAX UNIT VDD Supply voltage 2.7 5.5 V TA Operating free-air temperature –40 85 °C at specified free-air temperature, V DD = 3.3 V (unless otherwise noted) PARAMETER TEST CONDITION MIN TYP MAX UNIT IDD Supply current 2.25 5 mA VIO Input offset voltage 5 20 mV PSRR Power supply rejection ratio VDD = 3.2 V to 3.4 V 55 dB IDD(SD) Quiescent current in shutdown 0.6 20 µA 2 |
类似零件编号 - TPA302DG4 |
|
类似说明 - TPA302DG4 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |