Philips Semiconductors

Product specification

74LV365

Hex buffer/line driver (3-State)

1998 May 29

4

RECOMMENDED OPERATING CONDITIONS

SYMBOL

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNIT

DC supply voltage

See Note 1

1.0

3.3

3.6

V

Input voltage

0

–

V

Output voltage

0

–

V

Operating ambient temperature range in free air

See DC and AC

characteristics

–40

–40

+85

+125

°C

Input rise and fall times

–

–

–

–

–

–

–

500

200

100

ns/V

NOTE:

In accordance with the Absolute Maximum Rating System (IEC 134).

Voltages are referenced to GND (ground = 0V).

SYMBOL

PARAMETER

CONDITIONS

RATING

UNIT

DC supply voltage

–0.5 to +4.6

V

DC input diode current

20

mA

DC output diode current

50

mA

DC output source or sink current

– bus driver outputs

35

mA

–bus driver outputs

70

mA

Storage temperature range

–65 to +150

°C

Power dissipation per package

for temperature range: –40 to +125

°C

–plastic DIL

above +70

°C derate linearly with 12mW/K

750

mW

–plastic mini-pack (SO)

above +70

°C derate linearly with 8 mW/K

500

mW

–plastic shrink mini-pack (SSOP and TSSOP)

above +60

°C derate linearly with 5.5 mW/K

400

NOTES:

1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the

device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to

absolute-maximum-rated conditions for extended periods may affect device reliability.

2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.