数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF Download HTML

IMIC9714 Datasheet(数据表) 2 Page - List of Unclassifed Manufacturers

部件型号  IMIC9714
说明  100 MHz Clock Generator with SSCG and Power Management for Mobile Application
下载  12 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  ETC1 [List of Unclassifed Manufacturers]
网页  
标志 

IMIC9714 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers

 
Zoom Inzoom in Zoom Outzoom out
 2 page
background image
C9714
100 MHz Clock Generator with SSCG and Power Management for Mobile Application
Approved Product
INTERNATIONAL MICROCIRCUITS, INC. 525 LOS COCHES ST.
Rev. 2.0
5/17/2000
MILPITAS, CA 95035 TEL: 408-263-6300 ext. 275 FAX 408-263-6571
Page 2 of 13
Pin Description
PIN No.
Pin Name
PWR
I/O
TYPE
Description
2
XIN
VDD
I
XTAL4
On-chip reference oscillator input pin. Requires either an
external parallel resonant crystal (nominally 14.318 MHz) or
externally generated reference signal
3
XOUT
VDD
O
XTAL4
O-chip reference oscillator output pin. Drives an external
parallel resonant crystal (14.318 MHz) when an externally
generated reference signal is used.
19
VDD
-
P
PWR
3.3 volt power supply for core logic.
23, 24
CPU (1,2)
VDDC
O
C100S
Clock outputs. CPU frequency table specified on page 1.
17
PD#
-
I
INP3U
Powers down device when LOW
18
CS#
-
I
INP3U
When signal is LOW, stops CPU clocks in low state.
16
SEL100/66#
-
I
INP3
Frequency select input pins. See frequency select table on
page 1. NO INTERNAL PULLUP RESISTOR IS PROVIDED
BY DEVICE
25
VDDC
-
P
PWR
2.5V power for CPU and Host clock outputs.
4
PCI_F
VDDP
O
P100S
Free running PCI clock 3.3V. Does not stop when PS# is at a
logic LOW level
5,6,9,
10,11
PCI(1:5)
VDDP
O
P100S
PCI output clocks. See frequency table of page 1.
20
PS#
-
I
INP3U
When signal is LOW, stops all PCI clocks in low state.
8
VDDP
-
P
PWR
3.3 Volt power supply pins for free running PCI clock output
buffer.
13
48M
VDDF
O
U48
Fixed 48 MHz clock.
14
48-24M/TS#
VDDF
I/O
U48BU
Power up selectable 48 or 24 MHz clock. If strapped LOW at
powerup causes the devices outputs to be tri-stated until the
next power up sequence occurs.
26
REF1/SS#
VDDR
I/O
U48BU
At power up this pin determines if the device’s spread
spectrum modulation feature is enabled or disabled. After
power up this pin becomes a reference clock output. A 0 (logic
low) enables SSCG and a 1 (logic high) disables SSCG.
27
REF2/SEL48
#
VDDR
I/O
U48BU
At power up this pin determine the frequency of the clock at pin
14. If it is LOW, the clock will be 48 MHz, if HIGH the clock will
be 24 MHz. After power up this pin will become a reference
clock output.
12
VDDF
-
P
PWR
Power for fixed clock output buffer.
1, 7, 15,
21, 22
VSS
-
P
PWR
Ground pins for device.
28
VDDR
-
P
PWR
Power for Reference Oscillator output buffer.
Notes
1.
INP3U pins have internal pullup resistors that will guarantee to a logic 1 (high) level if no connection is made to the
device’s pin. INP3 pins do not contain this function and must be electrically connected to VDD or VSS by external
circuitry to ensure a valid logic 1 or 0 is sensed.




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl