DP83848C datasheet(43/82 Pages) NSC

部件名	DP83848C

功能描述	PHYTER - Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver

Download	82 Pages

Scroll/Zoom	100%

制造商	NSC [National Semiconductor (TI)]

网页	http://www.national.com

标志

43 / 82 page

43

www.national.com

7.1.2 Basic Mode Status Register (BMSR)

Table 12. Basic Mode Status Register (BMSR), address 0x01

Bit

Bit Name

Default

Description

15

100BASE-T4

0, RO/P

100BASE-T4 Capable:

0 = Device not able to perform 100BASE-T4 mode.

14

100BASE-TX

Full Duplex

1, RO/P

100BASE-TX Full Duplex Capable:

1 = Device able to perform 100BASE-TX in full duplex mode.

13

100BASE-TX

Half Duplex

1, RO/P

100BASE-TX Half Duplex Capable:

1 = Device able to perform 100BASE-TX in half duplex mode.

12

10BASE-T

Full Duplex

1, RO/P

10BASE-T Full Duplex Capable:

1 = Device able to perform 10BASE-T in full duplex mode.

11

10BASE-T

Half Duplex

1, RO/P

10BASE-T Half Duplex Capable:

1 = Device able to perform 10BASE-T in half duplex mode.

10:7

RESERVED

0, RO

RESERVED: Write as 0, read as 0.

6

MF Preamble

Suppression

1, RO/P

Preamble suppression Capable:

1 = Device able to perform management transaction with preamble

suppressed, 32-bits of preamble needed only once after reset, invalid

opcode or invalid turnaround.

0 = Normal management operation.

5

Auto-Negotiation Com-

plete

0, RO

Auto-Negotiation Complete:

1 = Auto-Negotiation process complete.

0 = Auto-Negotiation process not complete.

4

Remote Fault

0, RO/LH

Remote Fault:

1 = Remote Fault condition detected (cleared on read or by reset).

Fault criteria: Far End Fault Indication or notification from Link Part-

ner of Remote Fault.

0 = No remote fault condition detected.

3

Auto-Negotiation Abili-

ty

1, RO/P

Auto Negotiation Ability:

1 = Device is able to perform Auto-Negotiation.

0 = Device is not able to perform Auto-Negotiation.

2

Link Status

0, RO/LL

Link Status:

1 = Valid link established (for either 10 or 100 Mb/s operation).

0 = Link not established.

The criteria for link validity is implementation specific. The occurrence

of a link failure condition will causes the Link Status bit to clear. Once

cleared, this bit may only be set by establishing a good link condition

and a read via the management interface.

1

Jabber Detect

0, RO/LH

Jabber Detect: This bit only has meaning in 10 Mb/s mode.

1 = Jabber condition detected.

0 = No Jabber.

This bit is implemented with a latching function, such that the occur-

rence of a jabber condition causes it to set until it is cleared by a read

to this register by the management interface or by a reset.

0

Extended Capability

1, RO/P

Extended Capability:

1 = Extended register capabilities.

0 = Basic register set capabilities only.

类似零件编号 - DP83848C

制造商	部件名	数据表	功能描述
National Semiconductor ...	DP83848C	2Mb / 82P	PHYTER짰 - Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
National Semiconductor ...	DP83848C	2Mb / 84P	PHYTER짰 - Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
Texas Instruments	DP83848C	711Kb / 86P	[Old version datasheet] Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
	DP83848C	2Mb / 86P	[Old version datasheet] Industrial Controls and Factory Automation
	DP83848CVV	722Kb / 86P	[Old version datasheet] Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver

More results

类似说明 - DP83848C

制造商	部件名	数据表	功能描述
Texas Instruments	DP83848I	1Mb / 97P	[Old version datasheet] PHYTER Industrial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
National Semiconductor ...	DP83848YB	2Mb / 82P	PHYTER - Extreme Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
Texas Instruments	DP83848-HT	1Mb / 81P	[Old version datasheet] PHYTER Military Temperature Single Port 10/100 MB/S Ethernet Physical Layer Transceiver
	DP83848-EP	1Mb / 92P	[Old version datasheet] PHYTER MILITARY TEMPERATURE SINGLE PORT 10/100 MB/S ETHERNET PHYSICAL LAYER TRANSCEIVER
	DP83848Q	974Kb / 74P	[Old version datasheet] PHYTER Extended Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
	DP83849C	959Kb / 101P	[Old version datasheet] PHYTER DUAL Commercial Temperature Dual Port 10/100 Mb/s Ethernet Physical Layer Transceiver
	DP83848CVVX	617Kb / 86P	[Old version datasheet] Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
	DP83848C	711Kb / 86P	[Old version datasheet] Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
	DP83848CVV	722Kb / 86P	[Old version datasheet] Commercial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
	DP83848I	788Kb / 86P	[Old version datasheet] DP83848I PHYTER Industrial Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver