A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 firstname.lastname@example.org
Absolute Maximum Ratings4
-55°C to +100°C
-55°C to +100°C
RF Input power
Total Power Dissipation
DC Voltage, Pin 5
DC Voltage, Pin 7
State of Control Voltage
RF-IN to RF-OUT1
RF-IN to RF-OUT 2
4. Permanent damage may occur if any of these limits are exceeded. Electrical Maximum ratings are not
intended for continuous normal operation.
Characterization & Application Circuit
Note: D1&D2 are optional.
Figure 1. Characterization & Application Circuit
Note: (DUT soldered on Mini-Circuits Characterization & Application Test Board TB-M3SWA250DRB+).
Insertion Loss, Amplitude Unbalance, Isolation, Return Loss, Input Power at 1dB Compression (P1dB) & Input
IP3 tested using E5071C microwave network analyzer.