数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF Download HTML

ATL431LI_V02 Datasheet(数据表) 14 Page - Texas Instruments

部件型号  ATL431LI
说明  ATL431LI / ATL432LI High Bandwidth Low-Iq Programmable Shunt Regulator
下载  29 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  TI1 [Texas Instruments]
网页  http://www.ti.com
标志 

ATL431LI Datasheet(HTML) 14 Page - Texas Instruments

Zoom Inzoom in Zoom Outzoom out
 14 page
background image
14
ATL431LI
ATL432LI
SLVSDU6D – JULY 2017 – REVISED NOVEMBER 2019
www.ti.com
Product Folder Links: ATL431LI ATL432LI
Submit Documentation Feedback
Copyright © 2017–2019, Texas Instruments Incorporated
Typical Applications (continued)
11.2.1.1 Design Requirements
For this design example, use the parameters listed in Table 1 as the input parameters.
Table 1. Design Parameters
DESIGN PARAMETER
EXAMPLE VALUE
Input Voltage Range
0 V to 5 V
Input Resistance
10 kΩ
Supply Voltage
24 V
Cathode Current (Ik)
5 mA
Output Voltage Level
~2 V – VSUP
Logic Input Thresholds VIH/VIL
VL
11.2.1.2 Detailed Design Procedure
When using ATL431LI as a comparator with reference, determine the following:
Input Voltage Range
Reference Voltage Accuracy
Output logic input high and low level thresholds
Current Source resistance
11.2.1.2.1
Basic Operation
In the configuration shown in Figure 23 ATL431LI will behave as a comparator, comparing the VREF pin voltage
to the internal virtual reference voltage. When provided a proper cathode current (IK), ATL431LI will have enough
open loop gain to provide a quick response. This can be seen in Figure 24, where the RSUP=10 kΩ (IKA=500 µA)
situation responds much slower than RSUP=1 kΩ (IKA=5 mA). With the ATL431LI max Operating Current (IMIN)
being 0.08 mA, operation near that could result in low gain, leading to a slow response.
11.2.1.2.1.1
Overdrive
Slow or inaccurate responses can also occur when the reference pin is not provided enough overdrive voltage.
This is the amount of voltage that is higher than the internal virtual reference. The internal virtual reference
voltage will be within the range of 2.5 V ±(0.5% or 1.0%) depending on which version is being used. The more
overdrive voltage provided, the faster the ATL431LI will respond.
For applications where ATL431LI is being used as a comparator, it is best to set the trip point to greater than the
positive expected error (that is +1.0% for the A version). For fast response, setting the trip point to >10% of the
internal VREF should suffice.
For minimal voltage drop or difference from Vin to the ref pin, TI recommends to use an input resistor <10kΩ to
provide Iref.




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl