11

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard

L9007_SBC • 9/18/2018

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Through-Hole Inductors – Conformally Coated SBC Coils

Handling Precautions

Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other

environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,

and long-term storage.

KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%

relative humidity. Atmospheres should be free of chlorine and sulfur-bearing compounds. Temperature fluctuations should

be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly,

preferably within six months of receipt.

Export Control

For customers in Japan

For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export

license specified by the law is required for export.

For customers outside Japan

Inductors should not be used, or sold for use, in the development, production, stockpiling or utilization of any conventional

weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons.