DP83869HM datasheet(37/138 Pages) TI1

部件名	DP83869HM

功能描述	High Immunity 10/100/1000 Ethernet Physical Layer Transceiver With Copper and Fiber Interface

Download	138 Pages

Scroll/Zoom	100%

制造商	TI1 [Texas Instruments]

网页	http://www.ti.com

标志

37 / 138 page

37

DP83869HM

www.ti.com

SNLS614 – SEPTEMBER 2018

Product Folder Links: DP83869HM

Submit Documentation Feedback

9.4.9.1 Extended Address Space Access

The DP83869HM SMI function supports read or write access to the extended register set using registers REGCR

(0x000Dh) and ADDAR (0x000Eh) and the MDIO Manageable Device (MMD) indirect method defined in IEEE

802.3ah Draft for clause 22 for accessing the clause 45 extended register set.

The standard register set, MDIO registers 0 to 31, is accessed using the normal direct-MDIO access or the

indirect method, except for register REGCR (0x000Dh) and ADDAR (0x000Eh) which is accessed only using the

normal MDIO transaction. The SMI function ignores indirect accesses to these registers.

REGCR (0x000Dh) is the MDIO Manageable MMD access control. In general, register REGCR(4:0) is the device

address DEVAD that directs any accesses of ADDAR (0x000Eh) register to the appropriate MMD.

The DP83869HM supports one MMD device address. The vendor-specific device address DEVAD[4:0] = 11111

is used for general MMD register accesses.

All accesses through registers REGCR and ADDAR must use the correct DEVAD. Transactions with other

DEVAD are ignored. REGCR[15:14] holds the access function: address (00), data with no post increment (01),

data with post increment on read and writes (10) and data with post increment on writes only (11).

•

ADDAR is the address and data MMD register. ADDAR is used in conjunction with REGCR to provide the

access to the extended register set. If register REGCR[15:1] is 00, then ADDAR holds the address of the

extended address space register. Otherwise, ADDAR holds the data as indicated by the contents of its

address register. When REGCR[15:14] is set to 00, accesses to register ADDAR modify the extended register

set address register. This address register must always be initialized to access any of the registers within the

extended register set.

•

When REGCR[15:14] is set to 01, accesses to register ADDAR access the register within the extended

register set selected by the value in the address register.

•

When REGCR[15:14] is set to 10, access to register ADDAR access the register within the extended register

set selected by the value in the address register. After that access is complete, for both reads and writes, the

value in the address register is incremented.

•

When REGCR[15:14] is set to 11, access to register ADDAR access the register within the extended register

set selected by the value in the address register. After that access is complete, for write accesses only, the

value in the address register is incremented. For read accesses, the value of the address register remains

unchanged.

The following sections describe how to perform operations on the extended register set using register REGCR

and ADDAR. The descriptions use the device address for general MMD register accesses (DEVAD[4:0] =

11111).

9.4.9.1.1

Write Address Operation

1. Write the value 0x001F (address function field = 00, DEVAD = 31) to register REGCR.

2. Write the desired register address to register ADDAR.

Subsequent writes to register ADDAR (step 2) continue to write the address register.

9.4.9.1.2

Read Address Operation

To read the address register:

1. Write the value 0x001F (address function field = 00, DEVAD = 31) to register REGCR.

2. Read the register address from register ADDAR.

9.4.9.1.3

Write (No Post Increment) Operation

To write a register in the extended register set:

1. Write the value 0x001F (address function field = 00, DEVAD = 31) to register REGCR.

2. Write the desired register address to register ADDAR.

3. Write the value 0x401F (data, no post increment function field = 01, DEVAD = 31) to register REGCR.

4. Write the content of the desired extended register set register to register ADDAR.

Subsequent writes to register ADDAR (step 4) continue to rewrite the register selected by the value in the

address register.

类似零件编号 - DP83869HM

制造商	部件名	数据表	功能描述
National Semiconductor ...	DP83861	741Kb / 88P	Gig PHYTER 10/100/1000 Ethernet Physical Layer
	DP83861VQM	741Kb / 88P	Gig PHYTER 10/100/1000 Ethernet Physical Layer
	DP83861VQM-3	741Kb / 88P	Gig PHYTER 10/100/1000 Ethernet Physical Layer
	DP83864	48Kb / 4P	DP83864 Quad GigPHYTER 10/100/1000 Ethernet Physical Layer
Pulse A Technitrol Comp...	DP83864	253Kb / 12P	LAN DISCRETE TRANSFORMER MODULES G003.U 2/07

More results

类似说明 - DP83869HM

制造商	部件名	数据表	功能描述
Texas Instruments	DP83867IR	1Mb / 130P	[Old version datasheet] High Immunity 10/100/1000 Ethernet Physical Layer Transceiver
	DP83867CS	1Mb / 114P	[Old version datasheet] High Immunity, Small Form Factor 10/100/1000 Ethernet Physical Layer Transceiver
	DP83867IR	1Mb / 132P	[Old version datasheet] DP83867IR/CR Robust, High Immunity 10/100/1000 Ethernet Physical Layer Transceiver
National Semiconductor ...	DP83865	589Kb / 86P	10/100/1000 Ethernet Physical Layer
	DP83861VQM	741Kb / 88P	Gig PHYTER 10/100/1000 Ethernet Physical Layer
	DP83864	48Kb / 4P	DP83864 Quad GigPHYTER 10/100/1000 Ethernet Physical Layer
	DP83865BVH	31Kb / 2P	Gig PHYTER V 10/100/1000 Ethernet Physical Layer
Texas Instruments	DP83825I	861Kb / 78P	[Old version datasheet] Low Power 10/100 Mbps Ethernet Physical Layer Transceiver
Texas Instruments	DP83865DVH-NOPB	628Kb / 88P	[Old version datasheet] DP83865 Gig PHYTER V 10/100/1000 Ethernet Physical Layer
National Semiconductor ...	DP83865	591Kb / 86P	DP83865 Gig PHYTER V 10/100/1000 Ethernet Physical Layer