数据搜索系统,热门电子元器件搜索 |
|
GRT32EC81A226KE13 数据表(PDF) 3 Page - Murata Manufacturing Co., Ltd. |
|
GRT32EC81A226KE13 数据表(HTML) 3 Page - Murata Manufacturing Co., Ltd. |
3 / 30 page 6 Operational Life The measured and observed characteristics should satisfy the Solder the capacitor on the test substrate(glass epoxy board). specifications in the following table. Apply 100% of the rated voltage for 1000±12h at maximum operating Appearance No marking defects temperature ±3℃. Set for 24±2h at room temperature, then measure. The charge/discharge current is less than 50mA. Capacitance R6,C8: Within ±12.5% Change ・Initial measurement Dissipation R6,C8: 0.2max Perform a heat treatment at 150+0/-10℃ for 1h and then set Factor for 24±2h at room temperature. Perform the initial measurement. ・Measurement after test Insulation More than 100MΩ or 5Ω ∙ F (Whichever is smaller) Perform a heat treatment at 150+0/–10°C for 1h and then let Resistance sit for 24±2h at room temperature, then measure. 7 External Visual No defects or abnormalities Visual inspection 8 Physical Dimension Within the specified dimensions Using Measuring instrument of dimension. 9 Resistance to Appearance No marking defects Per MIL-STD-202 Method 215 Solvents Solvent 1 : 1 part (by volume) of isopropyl alcohol Capacitance Within the specified tolerance 3 parts (by volume) of mineral spirits Solvent 2 : Terpene defluxer Solvent 3 : 42 parts (by volume) of water Dissipation Within the specified initial value. 1 part (by volume) of propylene glycol monomethyl ether Factor 1 part (by volume) of monoethanolamine Insulation Within the specified initial value. Resistance 10 Mechanical Appearance No marking defects Solder the capacitor on the test substrate(glass epoxy board). Shock Three shocks in each direction should be applied along 3 mutually Capacitance Within the specified tolerance perpendicular axes of the test specimen (18 shocks). The specified test pulse should be Half-sine and should have a Dissipation Within the specified initial value. duration :0.5ms, peak value:1500g and velocity change: 4.7m/s. Factor Insulation Within the specified initial value. Resistance 11 Vibration Appearance No defects or abnormalities Solder the capacitor on the test substrate(glass epoxy board). The capacitor should be subjected to a simple harmonic motion having Capacitance Within the specified tolerance a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 2000Hz. The frequency range, from Dissipation Within the specified initial value. 10 to 2000Hz and return to 10Hz, should be traversed in Factor approximately 20min. This motion should be applied for 12 items in each 3 mutually perpendicular directions (total of 36 times). Insulation Within the specified initial value. Resistance 12 Resistance to The measured and observed characteristics should satisfy the Immerse the capacitor in Sn-3.0Ag-0.5Cu solder solution or an eutectic Soldering Heat specifications in the following table. solder solution at 260±5℃ for 10±1s. Appearance No marking defects Set at room temperature for 24±2h, then measure. Capacitance Within the specified tolerance ・Initial measurement Perform a heat treatment at 150+0/-10 ℃ for 1h and then set Dissipation Within the specified initial value. for 24±2h at room temperature. Factor Perform the initial measurement. Insulation Within the specified initial value. Resistance ■AEC-Q200 Murata Standard Specification and Test Methods No AEC-Q200 Test Item Specifications. AEC-Q200 Test Method JEMCGS-01744M 3 |
类似零件编号 - GRT32EC81A226KE13 |
|
类似说明 - GRT32EC81A226KE13 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |