数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF Download HTML

GRT32EC81A226KE13 Datasheet(数据表) 2 Page - Murata Manufacturing Co., Ltd.

部件型号  GRT32EC81A226KE13
说明  Chip Monolithic Ceramic Capacitor meet AEC-Q200 for Infotainment
下载  30 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  MURATA [Murata Manufacturing Co., Ltd.]
网页  http://www.murata.com
标志 

GRT32EC81A226KE13 Datasheet(HTML) 2 Page - Murata Manufacturing Co., Ltd.

 
Zoom Inzoom in Zoom Outzoom out
 2 page
background image
Pre-and Post-Stress
Electrical Test
2 High Temperature
The measured and observed characteristics should satisfy the
Solder the capacitor on the test substrate(glass epoxy board).
Exposure (Storage)
specifications in the following table.
Set the capacitor for 1000±12h at maximum operating temperature ±3℃.
Appearance
No marking defects
Set for 24±2h at room temperature, then measure.
Capacitance
R6, C8: Within ±12.5%
Change
Dissipation
R6, C8: 0.2 max.
Factor
Insulation
More than 500MΩ or 25Ω ∙ F (Whichever is smaller)
Resistance
3 Temperature Cycling
The measured and observed characteristics should satisfy the
Solder the capacitor on the test substrate(glass epoxy board).
specifications in the following table.
Perform the 1000 cycles test according to the four heat treatments
Appearance
No marking defects
in the following table.
Set for 24±2h at room temperature, then measure.
Capacitance
R6, C8: Within ±7.5%
Change
Dissipation
R6, C8: 0.2 max.
Factor
・Initial measurement
Insulation
Within the specified initial value.
Perform a heat treatment at 150+0/-10 ℃ for 1h and then set
Resistance
for 24±2h at room temperature.
Perform the initial measurement.
4 Destructive
No defects or abnormalities
Per EIA-469
Physical Analysis
5 Biased Humidity
The measured and observed characteristics should satisfy the
Solder the capacitor on the test substrate(glass epoxy board).
specifications in the following table.
Apply the rated voltage and 1.3+0.2/-0vdc (add 6.8kΩ resister)
Appearance
No marking defects
at 85±3℃ and 80 to 85% humidity for 1000±12h.
Remove and set for 24±2h at room temperature, then measure.
Capacitance
R6,C8: Within ±12.5%
The charge/discharge current is less than 50mA.
Change
Dissipation
R6,C8: 0.2 max
・Measurement after test
Factor
Perform a heat treatment at 150+0/–10°C for 1h and then let
sit for 24±2h at room temperature, then measure.
Insulation
More than 100MΩ or 5Ω ∙ F (Whichever is smaller)
Resistance
■AEC-Q200 Murata Standard Specification and Test Methods
No
AEC-Q200 Test Item
Specifications.
AEC-Q200 Test Method
1
-
Step
1
2
3
4
Temp.
(
C)
-55+0/-3
Room
Temp.
85 +3/-0 (For R6)
105+3/-0 (For C8)
Room
Temp.
Time
(min.)
15
3
1
15
3
1
JEMCGS-01744M
2




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl