数据搜索系统,热门电子元器件搜索 |
|
LM137KG-MD8 数据表(PDF) 9 Page - Texas Instruments |
|
LM137KG-MD8 数据表(HTML) 9 Page - Texas Instruments |
9 / 22 page 9 LM137QML www.ti.com SNVS313E – DECEMBER 2010 – REVISED DECEMBER 2016 Product Folder Links: LM137QML Submit Documentation Feedback Copyright © 2010–2016, Texas Instruments Incorporated (1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are specified only for the conditions as specified in Mil-Std-883, Method 1019.5, Condition A. (2) Limit of 0.3mV/mA is equivalent to 60mV 6.11 LM137H RH Electrical Characteristics AC Parameters 5962P9951708VXA The following conditions apply, unless otherwise specified. (1) PARAMETER TEST CONDITIONS SUB- GROUPS MIN MAX UNIT ΔVIN / ΔVOUT Ripple Rejection VIN = -6.25 V, IL = 125 mA, eI = 1VRMS at 2400 Hz 9 48 dB VNO Output Noise Voltage VIN = -6.25 V, IL = 50 mA 9 120 µVRMS ΔVOUT / ΔVIN Line Transient Response VIN = -6.25 V, VPulse = -1V, IL = 50 mA 9 80 mV/V ΔVO / Δ IL Load Transient Response(2) VIN = -6.25 V, IL = 50 mA, Δ IL = 200 mA 9 60 mV (1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are specified only for the conditions as specified in Mil-Std-883, Method 1019.5, Condition A. 6.12 LM137H RH Electrical Characteristics DC Parameters Drift Values 5962P9951708VXA The following conditions apply, unless otherwise specified. (1) Delta calculations performed on QMLV devices at group B, subgroup 5 only. PARAMETER TEST CONDITIONS SUB- GROUPS MIN MAX UNIT VOUT Output Voltage VIN = -4.25 V, IL = 5 mA 1 -0.01 0.01 V VIN = -4.25 V, IL = 500 mA 1 -0.01 0.01 V VIN = -41.25 V, IL = 5 mA 1 -0.01 0.01 V VIN = -41.25 V, IL = 50 mA 1 -0.01 0.01 V VR Line Line Regulation VIN = -41.25 V to -4.25 V, IL = 5 mA 1 -4.0 4.0 mV IAdj Adjust Pin Current VIN = -4.25 V, IL = 5 mA 1 -10 10 µA VIN = -41.25 V, IL = 5 mA 1 -10 10 µA (1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are specified only for the conditions as specified in Mil-Std-883, Method 1019.5, Condition A. 6.13 LM137H RH Electrical Characteristics DC Parameters Post Radiation Limits +25°C 5962P9951708VXA The following conditions apply, unless otherwise specified. (1) PARAMETER TEST CONDITIONS SUB- GROUPS MIN MAX UNIT VOUT Output Voltage VIN = -41.25 V, IL = 5 mA 1 -1.30 -1.225 V VIN = -41.25 V, IL = 50 mA 1 -1.30 -1.225 V VR Line Line Regulation VIN = -41.25 V to -4.25 V, IL = 5 mA 1 -9.0 +50 mV IAdj Adjust Pin Current VIN = -41.25 V, IL = 5 mA 1 25 140 µA Δ IAdj / VLine Adjust Pin Current Change vs. Line Voltage VIN = -41.25 V to -4.25 V, IL = 5 mA 1 -70 +20 µA VOUT Recovery Output Voltage Recovery After Output Short Circuit Current VIN = -40 V 1 -1.30 -1.225 V |
类似零件编号 - LM137KG-MD8 |
|
类似说明 - LM137KG-MD8 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |