LB1332D Datasheet(数据表) 5 Page - Sanyo Semicon Device
SANYO [Sanyo Semicon Device]
1 When a fan is rotating, the capacitor is charge at 2.8 µA (typ) and discharged through the C with pulses according to the
2 When a fan is locked, no discharge occurs through the C and the C voltage rises, turning OFF the output at V
1 (0.7 ×
3 When the output is turned OFF, discharge occurs through the C at 0.38 µA (typ). If the lock is not released when the C
voltage drops to V
2 (0.38 × V
), the capacitor is charged to V
1 again. (At this moment, the output is turned ON.)
These operations 2 and 3 repeated at a cycle of approximately t
=1:7 protect a motor.
4 If the lock is released when the C voltage drops to V
2, the output is turned ON, starting rotation.
(5) Rotation detect signal (RD pin)
Open collector output (Drive mode: ‘‘L’’, Stop mode: ‘‘H’’)
(6) Radio noise reducing (B1 and B2 pins)
These are the base pins for Darlington connected output transistors. If radio noise is a problem, add a capacitor of
approximately 0.01 to 0.1 µF between B1 and B2, or 0.001 µF to 0.01 µF between OUT and B.
Block Diagram and Sample Application Circuit − 1
0.47 to 10µF
*1 Use (10,000 to 100,000 pF) if radio noise is a problem.
*2 Use a Zener diode or capacitor for output stage protection.
[ DONATE ]
All Rights Reserved©
2003 - 2017
|   Chinese :
| German :
| Japanese :
| Russian :
| Spanish :
| French :
| Italian :
| Portuguese :
| Polish :