MLX92211-AxA

3-Wire Hall Effect Latch

390109221101

Page 10 of 13

Datasheet

Rev. 007

www.melexis.com

Jan/15

10 Standard information regarding manufacturability of Melexis products with

different soldering processes

Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level according

to following test methods:

Reflow Soldering SMD’s (Surface Mount Devices)



IPC/JEDEC J-STD-020

Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices

(classification reflow profiles according to table 5-2)



EIA/JEDEC JESD22-A113

Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing

(reflow profiles according to table 2)

Wave Soldering SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)



EN60749-20

Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat



EIA/JEDEC JESD22-B106 and EN60749-15

Resistance to soldering temperature for through-hole mounted devices

Iron Soldering THD’s (Through Hole Devices)



EN60749-15

Resistance to soldering temperature for through-hole mounted devices

Solderability SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)



EIA/JEDEC JESD22-B102 and EN60749-21

Solderability

For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature,

temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with

Melexis.

The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of adhesive

strength between device and board.

Melexis is contributing to global environmental conservation by promoting lead free solutions. For more information on

qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of the use of certain Hazardous

Substances) please visit the quality page on our website: http://www.melexis.com/quality.aspx

11 ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products.