数据搜索系统,热门电子元器件搜索 |
|
NBSG53A 数据表(PDF) 8 Page - ON Semiconductor |
|
NBSG53A 数据表(HTML) 8 Page - ON Semiconductor |
8 / 17 page NBSG53A http://onsemi.com 8 Table 9. DC CHARACTERISTICS, NECL INPUT WITH NECL OUTPUT (continued) (VCC = 0 V; VEE = −3.465 V to −2.375 V) (Note 19) Symbol Unit 85 °C 25 °C −40 °C Characteristic Symbol Unit Max Typ Min Max Typ Min Max Typ Min Characteristic DIFFERENTIAL INPUTS DRIVEN DIFFERENTIALLY (Figures 14 & 16) (Note 23) IIL Input LOW Current (@VIL) R, SEL CLK, inv_CLK, D, inv_D 20 5 100 50 20 5 100 50 20 5 100 50 mA IOLS OLS Input Current (see Figure 11) (OLS = VCC) (OLS = VCC − 0.4 V) (OLS = VCC − 0.8 V, OLS = FLOAT) (OLS = VCC − 1.2 V) −3.465 V ≤ VEE ≤ −3.0 V *(OLS = VEE) −3.0 V < VEE ≤ −2.375 V (OLS = VEE) −300 −1500 −1000 300 100 5 −100 −600 −400 900 300 100 −300 −1500 −1000 300 100 5 −100 −600 −400 900 300 100 −300 −1500 −1000 300 100 5 −100 −600 −400 900 300 100 mA TERMINATION RESISTORS RTIN Internal Input Termination Resistor 45 50 55 45 50 55 45 50 55 W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. *Typicals used for testing purposes. **When an output level of 400 mV is desired and VCC − VEE > 3.0 V, a 2 kW resistor should be connected from OLS to VEE. 19. Input and output parameters vary 1:1 with VCC. 20. All outputs loaded with 50 W to VCC − 2.0 V. 21. Vth, VIH, VIL, and VISE parameters must be complied with simultaneously. 22. Vth is applied to the complementary input when operating in single-ended mode. Vth = (VIH − VIL) / 2. 23. VIHD, VILD, VID and VIHCMR parameters must be complied with simultaneously. 24. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input signal. |
类似零件编号 - NBSG53A |
|
类似说明 - NBSG53A |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |