数据搜索系统,热门电子元器件搜索 |
|
ESW158M025AL3 数据表(PDF) 5 Page - Kemet Corporation |
|
ESW158M025AL3 数据表(HTML) 5 Page - Kemet Corporation |
5 / 24 page 5 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4009_ESW • 1/6/2016 Single-Ended Aluminum Electrolytic Capacitors – ESW Series, +105ºC Test Method & Performance Conditions Load Life Test Shelf Life Test Temperature 105°C 105°C Test Duration CanØ≤6.3mm 3,000 hours 1,000 hours Can Ø = 8.0 mm 4,000 hours Can Ø = 10.0 mm 5,000 hours CanØ≥13.0mm 6,000 hours If dimension is down size, endurance will be 1,000 hours less than standard Ripple Current Maximumripplecurrentspecifiedat100kHz105°C No ripple current applied Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor No voltage applied Performance The following specifications will be satisfied when the capacitor is restored to 20°C: Capacitance Change Within ±25% of the initial value Dissipation Factor Doesnotexceed200%ofthespecifiedvalue Leakage Current Doesnotexceedspecifiedvalue Shelf Life Thecapacitance,ESRandimpedanceofacapacitorwillnotchangesignificantlyafterextendedstorageperiods,howevertheleakage current will very slowly increase. KEMET's E-series aluminum electrolytic capacitors should not be stored in high temperatures or where there is a high level of humidity. The suitable storage condition for KEMET's E-series aluminum electrolytic capacitors is +5 to +35ºC and less than 75% in relative humidity. KEMET's E-series aluminum electrolytic capacitors should not be stored in damp conditions such as water, saltwater spray or oil spray. KEMET's E-series aluminum electrolytic capacitors should not be stored in an environment full of hazardous gas (hydrogen sulphide , sulphurous acid gas, nitrous acid, chlorine gas, ammonium, etc.) KEMET's E-series aluminum electrolytic capacitors should not be stored under exposure to ozone, ultraviolet rays or radiation. If a capacitor has been stored for more than 18 months under these conditions and it shows increased leakage current, then a treatment by voltage application is recommended. Re-age (Reforming) Procedure Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady valuebelowthespecifiedlimit.Duringre-agingamaximumchargingcurrentoftwicethespecifiedleakagecurrentor5mA(whichever is greater) is suggested. |
类似零件编号 - ESW158M025AL3 |
|
类似说明 - ESW158M025AL3 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |