110W Dual Output Switching Power Supply

WWW.ASTRODYNETDI.COM

ASTRODYNE USA: 1-800-823-8082

ASTRODYNE PACIFIC: 886-2-26983458

INPUT SPECIFICATIONS

Input Voltage Range

100-264VAC / 141-370 Volts(DC)

(90~100VAC 90% load max)

Frequency Range

47~63Hz

Inrush Current, typ: (cold start)

40 Amps

Input Current

3.0 Amps max @115VAC

1.5 Amps max @ 230VAC

Leakage Current

< 1.0mAmps / 240VAC

OUTPUT SPECIFICATIONS

Voltage and Current

See Selection Chart

Line Regulation

See Selection Chart

Load Regulation

See Selection Chart

Voltage Tolerance (Note 2)

See Selection Chart

Ripple/Noise (Note 1)

See Selection Chart

Hold Up Time @ FL

80mS @ FL

Setup, Rise Time @ FL

1200mS, 50mS @ FL

Over Voltage Protection

5Volts(DC) only: 5.75~6.75Volts(DC)

Hiccup mode, auto recover

Over Current Protection

105~135% rated output power

Hiccup mode, auto recover

DC Voltage Adjust

4.75~5.5Volts(DC): 5Volts(DC) only

GENERAL SPECIFICATIONS

Safety

UL60950-1

TUV EN60950-1 Approved

Insulation Resistance

≥ 100MΩ / 500Volts(DC)

EMI

Compliance to EN55022 (CISPR22)

Class B

Harmonic Current

Compliance to EN61000-3-2,-3

Efficiency

See Selection Chart

Isolation

3000VAC Input - Output

1500VAC Input - Ground

500VAC Output - Ground

EMS

Compliance to

EN61000-4-2,3,4,5,6,8,11

ENV50204

light industry level, criteria A

ENVIRONMENTAL SPECIFICATIONS

Oper. Temperature

-10°C to +50°C, 60°C with cooling fan

(See Derate Curve)

Storage Temperature

-20°C to +85°C, 10~95% RH

Relative Humidity

20 to +90% RH

Temperature Coefficient

±0.03% / °C (0-50°C) ON +5V output

MTBF

323K Hrs min, MIL-HDBK-217F (25°C)

Vibration

10~500Hz, 2G10min./1cycle, period for

60min. each along X, Y, Z axes

PHYSICAL SPECIFICATIONS

Size

Millimeters

177.8 x 107.95 x 46

Inches

7” x 4.25” x 1.81”

Weight

17.99 oz (510g)

NOTE

1. Ripple and Noise are measured at 20MHz of bandwidth by using a

12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.

2. Tolerance: includes set up tolerance, line regulation and load regula-

tion.

All specifications are typical at nominal input, full load, and 25°C unless other-

wise noted