TS7001IM8T datasheet(10/21 Pages) SILABS

部件名	TS7001IM8T

功能描述	A Micropower, 2-channel, 187.5-ksps, Serial-Output 12-bit SAR ADC

Download	21 Pages

Scroll/Zoom	100%

制造商	SILABS [Silicon Laboratories]

网页	http://www.silabs.com

标志

10 / 21 page

TS7001

Page 10

TS7001 Rev. 1.0

DESCRIPTION OF OPERATION

The

TS7001

is

a

single-supply,

low-power,

single/dual-channel,

12-bit

successive-

approximation ADC with an easy-to-use serial

interface. The ADC can be operated from a 3V

supply (2.7V to 3.6V). When operated from either a

3V, the TS7001 can operate at throughput rates up

to 187.5ksps when an external 3 MHz clock is

applied.

In a 8-pin MSOP package, the TS7001 integrates a

2.5-V

reference,

a

high-speed

track/hold,

a

successive-approximation ADC, and a serial digital

interface. An external serial clock is used to transfer

data to/from the ADC and controls the TS7001’s

conversion process. The TS7001 can be configured

for

single-

or

two-channel

operation.

When

configured as a single-channel ADC, the analog

input range is 0 to VREF (where an externally

applied VREF, if used, can range between 1.2 V and

VDD). When the TS7001 is configured for two-

channel applications, the analog input range on

each channel is set internally from 0V to VDD.

If the TS7001 is configured for single-channel

operation, the TS7001 can be operated in a read-

only mode by applying a logic LOW at all times to

the DIN pin (Pin 6) or by hard-wiring the DIN pin

permanently to GND. For maximum flexibility to

address

multiple

configurations

based

on

the

application, the DIN input can be used to load ADC

configuration data from a host processor into the

TS7001’s 8-bit Control Register.

TS7001 Operation and Transfer Function

The TS7001 is a successive-approximation ADC,

the core of which is a charge-redistribution DAC.

Figure 1 illustrates an equivalent circuit for the

TS7001 in signal acquisition phase. Here, Switch

SW1 is in Position A and Switch SW2 is closed. With

the sampling capacitor’s terminals connected to the

analog input on one side and REF on the other, the

analog signal is acquired. During the acquisition

phase, the inputs to the comparator are balanced

since both inputs are connected to REF.

During the conversion phase as shown in the

equivalent circuit in Figure 2, Switch SW1 is moved

from Position A to GND at Position B and Switch

SW2 is opened. At this point in time, the inputs to

the comparator become unbalanced. The TS7001’s

control logic and the charge-redistribution DAC work

together to add or subtract fixed packets of charge

from the sampling capacitor to balance once again

the comparator input terminals. At the time when the

comparator is rebalanced, the conversion process is

complete and the ADC’s control logic generates the

ADC serial output conversion data.

Figure 3 illustrates the ideal transfer function for the

TS7001 where the output data is coded straight

binary. Thus, the designed code transitions occur at

successive integer LSB values (that is, at 1 LSB, at

2 LSBs, etc) where the LSB size is VREF/4096.

Figure 1:TS7001’s Acquisition Phase Equivalent Circuit

Figure 2: TS7001’s Conversion Phase Equivalent Circuit

Figure 3: TS7001’s Unipolar Transfer Function for

Straight Binary Digital Data.

类似零件编号 - TS7001IM8T

制造商	部件名	数据表	功能描述
Touchstone Semiconducto...	TS7001IM8T	1Mb / 20P	A Micropower, 2-channel, 187.5-ksps, Serial-Output 12-bit SAR ADC
Touchstone Semiconducto...	TS7001IM8TP	1Mb / 20P	A Micropower, 2-channel, 187.5-ksps, Serial-Output 12-bit SAR ADC

More results

类似说明 - TS7001IM8T

制造商	部件名	数据表	功能描述
Touchstone Semiconducto...	TS7001	1Mb / 20P	A Micropower, 2-channel, 187.5-ksps, Serial-Output 12-bit SAR ADC
Touchstone Semiconducto...	TSA7887	1Mb / 20P	A Micropower, 2-channel, 125-ksps, Serial-Output 12-bit SAR ADC
Silicon Laboratories	TSA7887	1Mb / 21P	A Micropower, 2-channel, 125-ksps, Serial-Output 12-bit SAR ADC
Analog Devices	AD7887	465Kb / 25P	Micropower, 2-Channel, 125 kSPS, 12-Bit ADC in 8-Lead MSOP
	AD7866ARUZ	585Kb / 24P	Dual 1 MSPS, 12-Bit, 2-Channel SAR ADC with Serial Interface REV. A
	AD7866	304Kb / 20P	Dual 1 MSPS, 12-Bit, 2-Channel SAR ADC with Serial Interface REV. 0
	AD7866	585Kb / 24P	Dual 1 MSPS, 12-Bit, 2-Channel SAR ADC with Serial Interface REV. A
	AD7866	430Kb / 25P	Dual 1 MSPS, 12-Bit, 2-Channel SAR ADC with Serial Interface
STMicroelectronics	ADC1283	782Kb / 24P	8 multiplexed channels, 50 ksps to 200 ksps, 12-bit SAR ADC Rev 1 - March 2022
Maxim Integrated Produc...	MAXSPCSPARTAN6	1Mb / 9P	12-Bit, 2-/4-Channel, SAR ADC Support (MAX11612) Rev 0; 5/10