数据搜索系统,热门电子元器件搜索 |
|
LC87F2708AUMD-AH 数据表(PDF) 4 Page - ON Semiconductor |
|
LC87F2708AUMD-AH 数据表(HTML) 4 Page - ON Semiconductor |
4 / 24 page LC87F2708A No.A1335-4/24 ■ Internal Reset Circuit - Power-on reset (POR) function 1) POR reset is generated only at power-on time. 2) The POR release level can be selected from 3 levels (2.87V, 3.86V, and 4.35V) by optional configuration. - Low-voltage detection reset (LVD) function 1) LVD and POR functions are combined to generate resets when power is turned on and when power voltage falls below a certain level. 2) The use or disuse of the LVD function and the low voltage threshold level (3 levels: 2.81V, 3.79V, and 4.28V) can be selected by optional configuration. ■ Standby Function - HALT mode: Halts instruction execution while allowing the peripheral circuits to continue operation. 1) Oscillation is not halted automatically. 2) There are the following three ways of resetting the HALT mode. <1> Setting the Reset pin to the low level <2> Generating a reset signal via the watchdog timer or brown-out detector <3> Having an interrupt generated - HOLD mode: Suspends instruction execution and the operation of the peripheral circuits. 1) The medium- and high-speed RC oscillation circuits automatically stop operation. 2) There are the following four ways of resetting the HOLD mode. <1> Setting the Reset pin to the low level <2> Generating a reset signal via the watchdog timer or brown-out detector <3> Setting at least one of the INTA, INTB, INTC, INTD, INTE, and INTF pins to the specified level (INTA and INTB HOLD mode reset is available only when level detection is set.) <4> Applying input signals to the IN+ and IN pins so that the analog comparator output is set to the specified level (when the analog comparator output is assigned to the INTC input) ■ On-chip Debugger Function - Supports software debugging with the IC mounted on the target board (LC87D2708A). LC87F2708A has an On-chip debugger but its function is limited. - 3 channels of on-chip debugger pins are available. ■ Data Security Function Note3 - Protects the program data stored in flash memory from unauthorized read or copy. Note3: This data security function does not necessarily provide absolute data security. ■ Development Tools - On-chip debugger: 1) TCB87-Type B + LC87D2708A 2) TCB87-Type B + LC87F2708A 3) TCB87-Type C (3 wire version) + LC87D2708A 4) TCB87-Type C (3 wire version) + LC87F2708A |
类似零件编号 - LC87F2708AUMD-AH |
|
类似说明 - LC87F2708AUMD-AH |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |