STANDARD

MICROCIRCUIT DRAWING

SIZE

A

77034

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43218-3990

REVISION LEVEL

X

SHEET

4

DSCC FORM 2234

APR 97

1.3 Absolute maximum ratings – Continued. 2/

Cases X, 2, 5, and 6 ................................................................................ 0.5 A

Cases M, N, T, U, Y, Z, and 4 ................................................................. 1.5 A

1.4 Recommended operating conditions.

Output voltage range:

Device types 01, 05 ................................................................................. 1.2 to 37 V dc

Device types 02, 07 ................................................................................. 1.2 to 57 V dc

Device types 03, 06 ................................................................................. -1.2 to -37 V dc

Device types 04, 08 ................................................................................. -1.2 to -47 V dc

Input voltage range:

Device types 01, 05 ................................................................................. 4.25 V dc to 41.25 V dc

Device types 03, 06 ................................................................................. -4.25 V dc to -41.25 V dc

Device types 02, 07 ................................................................................. 4.25 V dc to 61.25 V dc

Device types 04, 08 ................................................................................. -4.25 V dc to -51.25 V dc

1.5 Radiation features.

Maximum total dose available (dose rate = 50 – 300 rads(Si)/s): 3/

Device types 02 and 07 ........................................................................... 100 Krads(Si)

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883

-

Test Method Standard Microcircuits.

MIL-STD-1835 -

Interface Standard Electronic Component Case Outlines.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 -

List of Standard Microcircuit Drawings.

MIL-HDBK-780 -

Standard Microcircuit Drawings.

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

3/

These parts may be dose rate sensitive in a space environment and may demonstrate enhanced low dose rate effects.

Radiation end point limits for the noted parameters are guaranteed only for the conditions specified in MIL-STD-883,

method 1019, condition A.