Visit us at

www.anaren.com

USA/Canada:

Toll Free:

Europe:

Asia:

(315) 432-8909

(800) 411-6596

+44 2392-232392

+86 512-62749282

Model PD0922J5050D2HF

Rev A

Ultra Low Profile 0805 Power Divider

50

to 50

Description

The PD0922J5050D2HF is a low profile, sub-miniature Wilkinson power divider in

an easy to use surface mount package and is ideal for high volume manufacturing

while delivering higher performances than traditional printed and lumped element

solutions. It has been designed for the following markets: DVB-S, GSM, DCS, PCS,

CDMA and GPS.

The PD0922J5050D2HF is matched to 50 Ω and has a height profile of 0.8 mm

which is ideal for high level integrations. A 2 section Wilkinson design results in

increased isolation performance. Two external resistors are required for operation.

Components are available on tape and reel for high volume manufacturing pick and

place.

ROOM (25°°°°C)

Parameter

Min.

Typ.

Max

Unit

Frequency

950

2150

MHz

Input Port Impedance

50

Output Port Impedance

50

Return Loss

9.3

11

dB

Insertion Loss*

0.7

0.8

dB

Amplitude Balance

0.1

0.5

dB

Phase Balance

1

3

Degrees

Isolation (Output Ports)

10.5

12

dB

Power Handling

2

Watts

Features:

• 950 – 2150 MHz

• 12dB Isolation (output ports)

• Good Return Loss

• 0.8mm Height Profile

• 50

Outputs/Inputs

• External resistors required

• Low Insertion Loss

• Surface Mountable

• Tape & Reel

• Non-conductive Surface

• RoHS Compliant

• Halogen Free

Operating Temperature

-55

+85

ºC

* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)

Outline Drawing

Designation

Output 1

Input

Mid 2

Mid 1

GND

Output 2

5

4

2

1

6

3

Pin

Mechanical Outline

-Dimensions are in Millimeters

6x

0.22

4x 0.65

6x 0.98

Orientation Marker

Denotes Pin Location

4

Orientation Marker

Denotes Pin Location

TOP VIEW (Near Side)

SIDE VIEW

BOTTOM VIEW (Far Side)

2x 0.15

4x 0.37

2.04±0.10

1.29±0.10

0.85±0.08

1

2

3

6

5

6x

0.30