数据搜索系统,热门电子元器件搜索 |
|
4-5435166-9 数据表(PDF) 1 Page - Tyco Electronics |
|
4-5435166-9 数据表(HTML) 1 Page - Tyco Electronics |
1 / 7 page Application Specification Dual In- Line Package (DIP) Programming Switches 114--1056 1 of 7 LOC B E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved *Trademark TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners. TOOLING ASSISTANCE CENTER 1--800--722--1111 PRODUCT INFORMATION 1--800--522--6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.te.com (7000 and 7100 Series) 03 MAY 11 Rev D All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_. Figures and illustrations are for identification only and are not drawn to scale. 1. INTRODUCTION This specification covers the requirements for application of DIP programming switches (7000 and 7100 Series) for printed circuit (pc) board applications. 7000 Series switches are designed for a life of 7,000 cycles per pole. 7100 Series switches are recommended for programming applications where the number of cycles is limited to 2,000 per pole. Switches are manually rocker actuated and are designed for wave soldering on printed circuit (pc) boards or insertion into DIP Sockets with in--row centerline spacing of 7.62 [.300]. 7000 series switches are black, and are available in 2 through 12 positions, while 7100 series switches are blue and available in 2 through 12 positions. Both series are available with a premium seal, an economy seal, or unsealed in the raised rocker (standard profile) or flush rocker profile (low profile). In addition, 7000 series switches are available with a side rocker profile (side actuated). Both series are individual single--pole, single--throw (SPST). 7000 series raised rocker profile switches may have ganged rockers for single--pole, double--throw (SPDT) and double--pole, double--throw (DPDT) make--before--break circuits. The unsealed switches are designed for socket applications and the sealed switches are designed for soldering directly to the pc board. The sealants prevent flux and other contaminants from entering the switch during soldering and cleaning. The raised rocker and side rocker profiles come unsealed or with an optional economy or premium masking top seal. The flush rocker profile comes unsealed or with an optional economy tape top seal or premium masking top seal. The multi--pole switches come unsealed only. All switches come standard with a bottom seal. Switches are designed for use in logic level switching applications. When corresponding with personnel, use the terminology provided in this specification to facilitate your inquiries for information. Basic terms and features of this product are provided in Figure 1. Figure 1 Raised Rocker White Dot Identifies Pin 1 Solder Tail Housing Position Number Flush Rocker White Dot Identifies Pin 1 Standard Profile Switch Side Rocker Switch Low-Profile Switch NOTE i |
类似零件编号 - 4-5435166-9 |
|
类似说明 - 4-5435166-9 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |