数据搜索系统,热门电子元器件搜索 |
|
AD7686 数据表(PDF) 7 Page - Analog Devices |
|
AD7686 数据表(HTML) 7 Page - Analog Devices |
7 / 28 page AD7688 Rev. A | Page 7 of 28 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS REF 1 VDD 2 IN+ 3 IN– 4 GND 5 VIO 10 SDI 9 SCK 8 SDO 7 CNV 6 AD7688 TOP VIEW (Not to Scale) Figure 5. 10-Lead MSOP Pin Configuration 1 REF 2 VDD 3 IN+ 4 IN– 5 GND 10 VIO 9SDI 8SCK 7SDO 6 CNV NOTES 1. FOR THE LFCSP PACKAGE ONLY, THE EXPOSED PADDLE MUST BE CONNECTED TO GND. TOP VIEW (Not to Scale) AD7688 Figure 6. 10-Lead QFN (LFCSP) Pin Configuration Table 7. Pin Function Descriptions Pin No. Mnemonic Type1 Function 1 REF AI Reference Input Voltage. The REF range is from 0.5 V to VDD. It is referred to the GND pin. This pin should be decoupled closely to the pin with a 10 μF capacitor. 2 VDD P Power Supply. 3 IN+ AI Differential Positive Analog Input. 4 IN− AI Differential Negative Analog Input. 5 GND P Power Supply Ground. 6 CNV DI Convert Input. This input has multiple functions. On its leading edge, it initiates the conversions and selects the interface mode, chain or CS. In CS mode, it enables the SDO pin when low. In chain mode, the data should be read when CNV is high. 7 SDO DO Serial Data Output. The conversion result is output on this pin. It is synchronized to SCK. 8 SCK DI Serial Data Clock Input. When the part is selected, the conversion result is shifted out by this clock. 9 SDI DI Serial Data Input. This input provides multiple features. It selects the interface mode of the ADC as follows: Chain mode is selected if SDI is low during the CNV rising edge. In this mode, SDI is used as a data input to daisy-chain the conversion results of two or more ADCs onto a single SDO line. The digital data level on SDI is output on SDO with a delay of 16 SCK cycles. CS mode is selected if SDI is high during the CNV rising edge. In this mode, either SDI or CNV can enable the serial output signals when low, and if SDI or CNV is low when the conversion is complete, the BUSY indicator feature is enabled. 10 VIO P Input/Output Interface Digital Power. Nominally at the same supply as the host interface (1.8 V, 2.5 V, 3 V, or 5 V). EPAD N/A For the LFCSP package only, the exposed paddle must be connected to GND. 1AI = Analog Input, DI = Digital Input, DO = Digital Output, P = Power, and N/A = not applicable. |
类似零件编号 - AD7686 |
|
类似说明 - AD7686 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |