数据搜索系统,热门电子元器件搜索 |
|
MC07XSC200EK 数据表(PDF) 10 Page - Freescale Semiconductor, Inc |
|
MC07XSC200EK 数据表(HTML) 10 Page - Freescale Semiconductor, Inc |
10 / 51 page Analog Integrated Circuit Device Data 10 Freescale Semiconductor 07XSC200 OUTPUTS HS0 TO HS1 (CONTINUED) HS[0,1] Current Sense Ratio (CSR1) Accuracy (6.0 V < VHS[0:1] < 20 V) with 28W bit = 0 25 and 125 C •IHS[0:1] = 12.5 A •IHS[0:1] = 75 A -40 C •IHS[0:1] = 12.5 A •IHS[0:1] = 75 A CSR1_0_ACC -20 -17 -28 -25 – – – – 20 17 28 25 % HS[0,1] Current Recopy Accuracy with one calibration point (6.0 V < VHS[0:1] < 20 V) with 28W bit = 0 (17) •IHS[0:1] = 12.5 A CSR1_0_ACC (CAL) -5.0 – 5.0 % HS[0,1] Current Sense Ratio (CSR1) Accuracy (6.0V < VHS[0:1] < 20V) with 28W bit = 1 25 and 125 C •IHS[0:1] = 12.5 A •IHS[0:1] = 37.5 A -40 C •IHS[0:1] = 12.5 A •IHS[0:1] = 75 A CSR1_1_ACC -20 -17 -28 -25 – – – – 20 17 28 25 % HS[0,1] Current Recopy Accuracy with one calibration point (6.0 V < VHS[0:1] < 20 V) with 28W bit = 1 (17) •IHS[0:1] = 12.5 A CSR1_1_ACC (CAL) -5.0 – 5.0 % Current Sense Clamp Voltage • CSNS Open; IHS[0:1] = 5.0 A with CSR0 ratio VCL(CSNS) VDD+0.25 – VDD+1.0 V OFF OpenLoad Detection Source Current(18) IOLD(OFF) 30 – 100 A OFF OpenLoad Fault Detection Voltage Threshold VOLD(THRES) 2.0 3.0 4.0 V ON OpenLoad Fault Detection Current Threshold IOLD(ON) 80 330 660 mA ON OpenLoad Fault Detection Current Threshold with LED •VHS[0:1] = VPWR - 0.75 V IOLD(ON_LED) 2.5 5.0 10 mA Output Short to VPWR Detection Voltage Threshold • Output programmed OFF VOSD(THRES) VPWR-1.2 VPWR-0.8 VPWR-0.4 V Output Negative Clamp Voltage •0.5 A < IHS[0:1] < 5.0 A, Output programmed OFF VCL -22 – -16 V Output Overtemperature Shutdown for 4.5 V < VPWR < 28 V TSD 155 175 195 C Notes 17. Based on statistical analysis. It is not production tested. 18. Output OFF OpenLoad Detection Current is the current required to flow through the load for the purpose of detecting the existence of an open-load condition when the specific output is commanded OFF. Pull-up current is measured for VHS = VOLD(THRES) Table 3. Static Electrical Characteristics (continued) Characteristics noted under conditions 6.0 V VPWR 20 V, 3.0 V VDD 5.5 V, -40 C TA 125 C, GND = 0 V, unless otherwise noted. Typical values noted reflect the approximate parameter means at TA = 25 °C under nominal conditions, unless otherwise noted. Characteristic Symbol Min Typ Max Unit |
类似零件编号 - MC07XSC200EK |
|
类似说明 - MC07XSC200EK |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |