HLMP-1600

Integrated Resistor LED Lamps

Data Sheet

Figure A. T-1 package.

Package Dimensions

HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621

HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601

HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681

Features

• Integral current limiting resistor

• TTL compatible

Requires no external current Limiter with 5 volt/12 volt

supply

• Cost effective

Saves space and resistor cost

• Wide viewing angle

• Available in all colors

Red, High Efficiency Red, Yellow, and High Performance

Green in T-1 and T-13/4 packages

Description

The 5 volt and 12 volt series lamps contain an integral

current limiting resistor in series with the LED. This allows

the lamp to be driven from a 5 volt/12 volt source without

an external current limiter. The red LEDs are made from

GaAsP on a GaAs substrate. The High Efficiency Red and

Yellow devices use GaAsP on a GaP substrate.

The green devices use GaP on a GaP substrate.The diffused

lamps provide a wide off-axis viewing angle.

panel mounted by using the HLMP-0103 clip and ring.

6.1 (0.240)

5.6 (0.220)

23.0

(0.90) MIN.

0.64 (0.025)

SQUARE NOMINAL

2.54 (0.100)

NOM.

CATHODE

1.27 (0.050)

NOM.

0.89 (0.035)

0.64 (0.025)

9.19 (0.362)

8.43 (0.332)

11.56 (0.455)

10.80 (0.425)

1.32 (0.052)

1.02 (0.040)

5.08 (0.200)

4.57 (0.180)

0.65 (0.026) max.

24.1(.95) MIN.

4.70 (.185)

4.19 (.165)

3.43 (.135)

2.92 (.115)

1.52 (.060)

1.02 (.040)

2.79 (.110)

2.29 (.090)

1.14 (.045)

0.51 (.020)

(0.022) 0.55 SQ. TYP.

(0.016) 0.40

Ø

3.17 (.125)

2.67 (.105)

6.35 (.250)

5.58 (.220)

Notes:

1. All dimensions are in mm (inches).

2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.

3. For PCB hole recommendations, see the Precautions section.