The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin

is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained

in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Bussmann

®

TPC & TPCDS

DIN Rail Fused Disconnect Switch

• 35mm DIN rail mountable

• Front access.

• Three terminal style configurations available (see below).

• Two remote alarm terminal positions available.

Terminal Style (select one)

BB -

Bullet contact on the line

Bullet contact on the load

BS -

Bullet contact on the line

Stud terminal on the load

SS -

Stud terminal on the line

Stud terminal on the load

Thread (select one)

M -

Metric threads for panel mount

fasteners (M3) and stud (M5)

E -

English threads for panel mount

fasteners (6-32) and stud (10-32)

Remote Alarm Terminal Distance

(select one)

1 -

.645 inch from line terminal

2 -

.970 inch from line terminal

3 -

1.285 inch from line terminal

Terminal Style (select one)

CC -

Screw Clamp terminal on the line

Screw Clamp terminal on the load

BC -

Bullet contact on the line

Screw Clamp terminal on the load

SEC - Stud terminal on the line

English threads for stud (10-32)

Screw Clamp terminal on the load

SMC -Stud terminal on the line

Metric threads for stud (M5)

Screw Clamp terminal on the load

Remote Alarm Terminal Location

(select one)

1 -

Side ouput

(available on CC and BC terminal styles)

2 -

Bottom output, .970 inch

from line terminal

(available on BC terminal style only)

Part Number System --

Compact Fused Disconnect Switch

To identify part number, replace block with appropriate suffix to

identify line and load terminals, thread type, and alarm terminal

distance.

TPCDS

- TELPOWER® Compact Fused Disconnect Switch

Part Number System --

DIN Rail Fused Disconnect Switch

To identify part number, replace block with appropriate suffix

to identify line and load terminals, thread type if applicable,

and alarm terminal option.

TPCDS

- TELPOWER® Compact Fused Disconnect

S

witch D - DIN-Rail style product

TPCDS -

-

TPCDS - D -

Form No. TPC & TPCDS

Page 2 of 7

Data Sheet: 5023

3-26-03

SB03069

Compact Fused Disconnect Switch

• Bullet and / or stud terminals for line and load connections

(1.940 inch / 49.3 mm spacing).

• Front access with bullet terminals.

Rear access with stud terminals.

• Three terminal style configurations available (see below).

• Remote alarm terminal available in three positions common

to dc circuit protection devices.

Look for Telpower® BLUE™ fuses exclusively from Cooper Bussmann.