数据搜索系统,热门电子元器件搜索 |
|
74ACT715SC 数据表(PDF) 1 Page - Fairchild Semiconductor |
|
74ACT715SC 数据表(HTML) 1 Page - Fairchild Semiconductor |
1 / 14 page November 1988 Revised December 1998 © 1999 Fairchild Semiconductor Corporation DS010137.prf www.fairchildsemi.com 74ACT715•74ACT715-R Programmable Video Sync Generator General Description The ACT715 and ACT715-R are 20-pin TTL-input compati- ble devices capable of generating Horizontal, Vertical and Composite Sync and Blank signals for televisions and monitors. All pulse widths are completely definable by the user. The devices are capable of generating signals for both interlaced and noninterlaced modes of operation. Equalization and serration pulses can be introduced into the Composite Sync signal when needed. Four additional signals can also be made available when Composite Sync or Blank are used. These signals can be used to generate horizontal or vertical gating pulses, cursor position or vertical Interrupt signal. These devices make no assumptions concerning the sys- tem architecture. Line rate and field/frame rate are all a function of the values programmed into the data registers, the status register, and the input clock frequency. The ACT715 is mask programmed to default to a Clock Disable state. Bit 10 of the Status Register, Register 0, defaults to a logic “0”. This facilitates (re)programming before operation. The ACT715-R is the same as the ACT715 in all respects except that the ACT715-R is mask programmed to default to a Clock Enabled state. Bit 10 of the Status Register defaults to a logic “1”. Although completely (re)programma- ble, the ACT715-R version is better suited for applications using the default 14.31818 MHz RS-170 register values. This feature allows power-up directly into operation, follow- ing a single CLEAR pulse. Features s Maximum Input Clock Frequency > 130 MHz s Interlaced and non-interlaced formats available s Separate or composite horizontal and vertical Sync and Blank signals available s Complete control of pulse width via register programming s All inputs are TTL compatible s 8 mA drive on all outputs s Default RS170/NTSC values mask programmed into registers s ACT715-R is mask programmed to default to a Clock Enable state for easier start-up into 14.31818 MHz RS170 timing Ordering Code: Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Pin Assignment for DIP and SOIC FACT ™ is a trademark of Fairchild Semiconductor Corporation. Order Number Package Number Package Description 74ACT715SC M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide 74ACT715PC N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 74ACT715-RSC M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide 74ACT715-RPC N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide |
类似零件编号 - 74ACT715SC |
|
类似说明 - 74ACT715SC |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |