 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
TMP320C203 数据表(PDF) 9 Page - Texas Instruments |
|
||||||||||||||||||||||||||||||
TMP320C203 数据表(HTML) 9 Page - Texas Instruments |
|
|
9 / 84 page  TMS320C203, TMS320C209, TMS320LC203 DIGITAL SIGNAL PROCESSORS SPRS025B – JUNE 1995 – REVISED AUGUST 1998 9 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 TMS320C209 Terminal Functions (Continued) TERMINAL TYPE† DESCRIPTION NAME NO. TYPE† DESCRIPTION TEST SIGNALS TCK 8 I JTAG test clock. TCK is normally a free-running clock signal with a 50% duty cycle. The changes on test-access port (TAP) input signals (TMS and TDI) are clocked into the TAP controller, instruction register, or selected test-data register on the rising edge of TCK. Changes at the TAP output signal (TDO) occur on the falling edge of TCK. TDI 5 I JTAG test data input. TDI is clocked into the selected register (instruction or data) on a rising edge of TCK. TDO 71 O/Z JTAG test data output. The contents of the selected register (instruction or data) are shifted out of TDO on the falling edge of TCK. TDO is in the high-impedance state except when scanning of data is in progress. TDO goes into the high-impedance state when OFF is active low. TMS 32 I JTAG test mode-select. TMS is clocked into the TAP controller on the rising edge of TCK. TRST 80 I JTAG test reset. TRST, when active high, gives the JTAG scan system control of the operations of the device. If TRST is not connected or driven low, the device operates in its functional mode, and the JTAG signals are ignored. EMU0 EMU1/OFF 2 3 I/O/Z Emulator pin 0. When TRST is driven low, EMU0 must be high for activation of the OFF condition. When TRST is driven high, EMU0 is used as an interrupt to or from the emulator system and is defined as an input/output through the JTAG scan. Emulator pin 1. EMU1 disables all outputs. When TRST is driven high, EMU1/OFF is used as an interrupt to or from the emulator system and is defined as input/output by way of JTAG scan. When TRST is driven low, this pin is configured as OFF. EMU1/OFF, when active low, puts all output drivers in the high-imped- ance state. SUPPLY PINS VDD 1 15 50 51 76 PWR Power VSS 12 21 22 29 41 47 56 61 73 GND Ground † I = input, O = output, Z = high impedance, PWR = power, GND = ground |
类似零件编号 - TMP320C203 |
|
类似说明 - TMP320C203 |
|
|
链接网址 |
| 隐私政策 |
| ALLDATASHEETCN.COM |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
