SPECIFICATION CONTROL DRAWING

307 Constitution Drive Menlo Park, CA 94025, USA

Wire and

Harnessing

Products

TITLE :

CAP, SPLICE ENCAPSULATION

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.

INCHES DIMENSIONS ARE BETWEEN BRACKETS.

DOCUMENT NO.:

D-300-01/-03

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS IN

MICRON

Tyco Electronics reserves the right to amend

this drawing at any time. Users should

evaluate the suitability of the product for

their application.

DCR NUMBER:

D010043

REPLACES:

N/A

DRAWN BY:

M. FORONDA

DATE:

15-Feb.-01

PROD. REV.

SEE TABLE

DOC ISSUE:

1

SCALE:

None

SIZE:

A

SHEET:

1 of 7

If this document is printed it becomes uncontrolled. Check for the latest revision.

Product Dimensions

Product Rev

As Received

After Free Recovery

Maximum

Weight

Product

Name

A±2.54

(A±0.100)

øB

min

W

min

øB

max

W

min

Pounds/mpc

D-300-01

E

25.40

(1.000)

4.45

(0.175)

0.25

(0.010)

2.03

(0.080)

0.76

(0.030)

1.15

D-300-02

E

27.90

(1.100)

6.35

(0.250)

0.38

(0.015)

3.05

(0.120)

1.02

(0.040)

2.55

D-300-03

E

33.02

(1.300)

9.14

(0.360)

0.38

(0.015)

4.57

(0.180)

1.27

(0.050)

4.50

MATERIALS

1. MOLDED CAP: Heat-shrinkable, cross-linked, flame-retarded modified polyolefin.

2. MELTABLE RING: Modified thermoplastic.

APPLICATION

1. These parts are designed to meet the requirements as shown in the Requirements Section when tested as listed.

2. Parts to be assembled as outlined herein.

3. “B” recovered is the maximum inside diameter of the heat-shrinkable cap.

4. “W” is the wall thickness of the heat-shrinkable cap only, and is measured along the vertical wall.

5. “A” is the average length of the cap and is equal to (A min + A max)/2.

1.0

SCOPE

This document covers the requirements and test procedures applicable to heat shrinkable, stub-splice

encapsulation cap (caps) and the molded component thereof.

2.0

APPLICABLE DOCUMENTS

The specifications and standards referenced herein shall form part of this specification to the extent

specified.