TS3DS10224

SCDS318

– JUNE 2011

www.ti.com

ABSOLUTE MAXIMUM RATINGS

(1)

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

Supply voltage range

–0.3

4.0

V

–0.3

V

±100

mA

Continuous current through VCC or GND

±100

–0.3

V

RUK package

82.7

°C/W

Storage temperature range

–65

150

°C

(1)

Stresses above these ratings may cause permanent damage. These are stress ratings only, and functional operation of the device at

these or any other conditions beyond the recommended operating conditions is not implied. Exposure to absolute maximum conditions

for extended periods may degrade device reliability.

(2)

All voltages are with respect to ground, unless otherwise specified.

(3)

The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(4)

VI and VO are used to denote specific conditions for VI/O.

(5)

II and IO are used to denote specific conditions for II/O

(6)

The package thermal impedance is calculated in accordance with JESD 51-7.

RECOMMENDED OPERATING CONDITIONS

(1) (2)

MIN

MAX UNIT

Supply voltage

3

3.6

V

High-level control input voltage

V

Low-level control input voltage

0

0.6

V

Input/Output voltage

0

V

Operating free-air temperature

–40

85

°C

(1)

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

(2)

It is recommended to pull down to ground unused I/O pins through a 1-k

Ω resistor.

4

Copyright

© 2011, Texas Instruments Incorporated