数据搜索系统,热门电子元器件搜索 |
|
CS5464-ISZ 数据表(PDF) 5 Page - Cirrus Logic |
|
CS5464-ISZ 数据表(HTML) 5 Page - Cirrus Logic |
5 / 46 page CS5464 DS682F3 5 1. OVERVIEW The CS5464 is a CMOS power measurement integrated circuit utilizing four analog-to-digital convert- ers to measure line voltage, temperature, and current from up to two sources. It calculates active, reactive, and apparent power as well as RMS and peak voltage and current. It handles other system-related func- tions, such as pulse output conversion, voltage sag, current fault, voltage zero crossing, line frequency, and tamper detection. The CS5464 is optimized to interface to current transformers or shunt resistors for current measurement, and to a resistive divider or voltage transformer for voltage measurement. Two full-scale ranges are pro- vided on the current inputs to accommodate both types of current sensors. The second current channel can be used for tamper detection or as a second current input. The CS5464’s three differential inputs have a common-mode input range from analog ground (AGND) to the positive analog supply (VA+). An additional analog input (PFMON) is provided to allow the application to determine when a power failure is in progress. By monitoring the unregulated power supply, the application can take any required action when a power loss occurs. An on-chip voltage reference (nominally 2.5 volts) is generated and provided at analog output, VREFOUT. This reference can be supplied to the chip by connecting it to the reference voltage input, VREFIN. Alter- natively, an external voltage reference can be supplied to the reference input. Three digital outputs (E1, E2, E3) provide a variety of output signals and, depending on the mode select- ed, provide energy pulses, power failure indication, or other choices. The CS5464 includes a three-wire serial host interface to an external microcontroller or serial E2PROM. Signals include serial data input (SDI), serial data output (SDO), serial clock (SCLK), and optionally, a chip select (CS), which allows the CS5464 to share the SDO signal with other devices. A MODE input is used to control whether an E2PROM will be used instead of a host microcontroller. |
类似零件编号 - CS5464-ISZ |
|
类似说明 - CS5464-ISZ |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |