 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
TD1-2D00-030 数据表(PDF) 4 Page - Magnetrol International, Inc. |
|
||||||||||||||||||||||||||||||
TD1-2D00-030 数据表(HTML) 4 Page - Magnetrol International, Inc. |
|
|
4 / 32 page  4 54-610 Thermatel Model TD1/TD2 Flow Level Switch 1.0 Quick Start Unless ordered with factory calibration, the set point of the unit must be adjusted for your application. To calibrate, adjust the alarm set point potentiometer. Turn the potentiometer clockwise to go out of alarm. Turn potentiometer counterclockwise to cause the switch to go into alarm (red LED on). Refer to the Calibration section on page 11 for detailed procedure. 2.0 Installation 2.1 Unpacking Unpack the instrument carefully, making sure all compo- nents have been removed from the packing material. Inspect all components for damage, and report any con- cealed damage to the carrier within 24 hours. Check the contents of the carton, making sure it agrees with the packing slip and the purchase order. Verify that the model number imprinted on the nameplate matches the number on the packing slip and the purchase order. Report any discrepancies to the factory. Check and record the serial number for future reference when ordering parts. Serial Number 2.2 Electrostatic Discharge (ESD) Handling Procedure Magnetrol’s electronic instruments are manufactured to the highest quality standards. These instruments utilize elec- tronic components which may be damaged by static elec- tricity present in most work environments. The following steps are recommended to reduce the risk of component failure due to electrostatic discharge: 1. Ship and store circuit boards in anti-static bags. If an anti- static bag is not available, wrap board in aluminum foil. Do not place boards on foam packing materials. 2. Use a grounding wrist strap when installing and removing circuit boards. A grounded workstation is also recommended. 3. Handle printed circuit boards only by the edges. Do not touch components or connector pins. 4. Ensure that all electrical connections are completely made and none are partial or floating. Ground all equipment to a good, earth ground. |
类似零件编号 - TD1-2D00-030 |
|
类似说明 - TD1-2D00-030 |
|
|
链接网址 |
| 隐私政策 |
| ALLDATASHEETCN.COM |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
