数据搜索系统,热门电子元器件搜索 |
|
KM416V10CT-L5 数据表(PDF) 7 Page - Samsung semiconductor |
|
KM416V10CT-L5 数据表(HTML) 7 Page - Samsung semiconductor |
7 / 35 page KM416C1004C, KM416C1204C CMOS DRAM KM416V1004C, KM416V1204C NOTES An initial pause of 200us is required after power-up followed by any 8 RAS-only refresh or CAS-before-RAS refresh cycles before proper device operation is achieved. Input voltage levels are Vih/Vil. VIH(min) and VIL(max) are reference levels for measuring timing of input signals. Transition times are measured between VIH(min) and VIL(max) and are assumed to be 2ns for all inputs. Measured with a load equivalent to 2 TTL(5V)/1TTL(3.3V) loads and 100pF. Operation within the tRCD(max) limit insures that tRAC(max) can be met. tRCD(max) is specified as a reference point only. If tRCD is greater than the specified tRCD(max) limit, then access time is controlled exclusively by tCAC. Assumes that tRCD ≥tRCD(max). This parameter defines the time at which the output achieves the open circuit condition and is not referenced to Voh or Vol. tWCS, tRWD, tCWD, tAWD and tCPWD are non restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS ≥tWCS(min), the cycle is an early write cycle and the data output will remain high impedance for the duration of the cycle. If tCWD ≥tCWD(min), tRWD≥tRWD(min), tAWD≥tAWD(min) and tCPWD≥tCPWD(min), then the cycle is a read- modify-write cycle and the data output will contain the data read from the selected address. If neither of the above conditions is satisfied, the condition of the data out is indeterminate. Either tRCH or tRRH must be satisfied for a read cycle. These parameters are referenced to CAS falling edge in early write cycles and to W falling edge in OE controlled write cycle and read-modify-write cycles. Operation within the tRAD(max) limit insures that tRAC(max) can be met. tRAD(max) is specified as a reference point only. If tRAD is greater than the specified tRAD(max) limit, then access time is controlled by tAA. KM416C/V10(2)04C/C-L Truth Table RAS LCAS UCAS W OE DQ0 - DQ7 DQ8-DQ15 STATE H X X X X Hi-Z Hi-Z Standby L H H X X Hi-Z Hi-Z Refresh L L H H L DQ-OUT Hi-Z Byte Read L H L H L Hi-Z DQ-OUT Byte Read L L L H L DQ-OUT DQ-OUT Word Read L L H L H DQ-IN - Byte Write L H L L H - DQ-IN Byte Write L L L L H DQ-IN DQ-IN Word Write L L L H H Hi-Z Hi-Z - 8. 6. 5. 10. 9. 3. 2. 1. 4. 7. |
类似零件编号 - KM416V10CT-L5 |
|
类似说明 - KM416V10CT-L5 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |