Motion Control I/O Modules
Features
PCM-3202I
2-port AMONet RS-485 PCI-104 Master Card
Max. 20 Mbps transfer rate
Supports 2 independent AMONet RS-485 rings
Supports up to 128 AMONet RS-485 slave modules
Easy installation with Box Header and LED diagnostics
Max. 100 m (20 Mbps/32 slave modules) communication distance
RoHS
COMPLIANT
2002/95/EC
Introduction
PCM-3202I is a PCI-104 interface card which supports two AMONet RS-485 master rings, and transfers data between host and slaves directly without any operations in between.
Each ring can control up to 2,048 I/O points, 256 axes, or a combination of I/O points and axes for motion control. The ring can support up to 20 Mbps transfer rate and a maximum
communication distance of up to 100 meters.
The communication between master and slave is based on a customized RS-485 solution that saves wires, covers a long distance, supports high-speed communication and has
time-deterministic features. The communication interface between master and host PC is accomplished by memory mapping. Various functions can be chosen on the slave modules,
and standard industrial DIN-rail mounting design makes it easy to distribute them in the field. The master collects information from slave modules and publishes the information to
its host PC.
Specifications
AMONet RS-485 Motion Control
AMONet RS-485 Rings 2
Interface
Half duplex RS-485
Cable Type
CAT5 UTP/STP Ethernet cable
Surge Protection
10 kV
Transmission Speeds
2.5, 5, 10, and 20 Mbps
Data Flow Control
Automatic
Communication
100 m @ 20 Mbps w/32 slave modules
Distance
Slave Module Support Digital I/O, Motion Control, Analog I/O
General
Bus Type
PCI-104
Certifications
CE
Connectors
4 x 10-pin box header
Dimensions (L x H)
96 x 90 mm (3.8" x 3.5")
Power Consumption
+5 VDC @ 0.5 A typical
Humidity
5 ~ 95% RH, non-condensing (IEC 68-2-3)
Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Storage Temperature
-20 ~ 85° C (-4 ~ 185° F)
Ordering Information
PCM-3202I
2-port AMONet RS-485 PCI-104 Master Card
AMAX-2241/PMA
4-axis AMONet Motion Module for Panasonic Minas A
AMAX-2242/J2S
4-axis AMONet Motion Module for Mitsubishi MR-J2S
AMAX-2243/YS2
4-axis AMONet Motion Module for Yaskawa Sigma-II
AMAX-2752SY
32-ch Isolated Digital Input AMONet Module
AMAX-2754SY
32-ch Isolated Digital Output AMONet Module
AMAX-2756SY
16/16-ch Isolated Digital I/O AMONet Module
PCL-10220M-2
20-pin SCSI Cable, 2 m
PCL-10150M-2
50-pin SCSI Cable, 2 m