数据搜索系统,热门电子元器件搜索 |
|
AD9251-40EBZ 数据表(PDF) 9 Page - Analog Devices |
|
AD9251-40EBZ 数据表(HTML) 9 Page - Analog Devices |
9 / 36 page AD9251 Rev. 0 | Page 9 of 36 ABSOLUTE MAXIMUM RATINGS Table 6. Parameter Rating AVDD to AGND −0.3 V to +2.0 V DRVDD to AGND −0.3 V to +3.9 V VIN+A, VIN+B, VIN−A, VIN−B to AGND −0.3 V to AVDD + 0.2 V CLK+, CLK− to AGND −0.3 V to AVDD + 0.2 V SYNC to AGND −0.3 V to DRVDD + 0.3 V VREF to AGND −0.3 V to AVDD + 0.2 V SENSE to AGND −0.3 V to AVDD + 0.2 V VCM to AGND −0.3 V to AVDD + 0.2 V RBIAS to AGND −0.3 V to AVDD + 0.2 V CSB to AGND −0.3 V to DRVDD + 0.3 V SCLK/DFS to AGND −0.3 V to DRVDD + 0.3 V SDIO/DCS to AGND −0.3 V to DRVDD + 0.3 V OEB to AGND −0.3 V to DRVDD + 0.3 V PDWN to AGND −0.3 V to DRVDD + 0.3 V D0A/D0B through D13A/D13B to AGND −0.3 V to DRVDD + 0.3 V DCOA/DCOB to AGND −0.3 V to DRVDD + 0.3 V Operating Temperature Range (Ambient) −40°C to +85°C Maximum Junction Temperature Under Bias 150°C Storage Temperature Range (Ambient) −65°C to +150°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. THERMAL CHARACTERISTICS The exposed paddle is the only ground connection for the chip. The exposed paddle must be soldered to the AGND plane of the user’s circuit board. Soldering the exposed paddle to the user’s board also increases the reliability of the solder joints and maximizes the thermal capability of the package. Table 7. Thermal Resistance Package Type Airflow Velocity (m/sec) θJA1,2 θJC1,3 θJB1,4 Unit 64-Lead LFCSP 9 mm × 9 mm (CP-64-4) 0 23 2.0 °C/W 1.0 20 12 °C/W 2.5 18 °C/W 1 Per JEDEC 51-7, plus JEDEC 25-5 2S2P test board. 2 Per JEDEC JESD51-2 (still air) or JEDEC JESD51-6 (moving air). 3 Per MIL-Std 883, Method 1012.1. 4 Per JEDEC JESD51-8 (still air). Typical θJA is specified for a 4-layer PCB with a solid ground plane. As shown in Table 7, airflow improves heat dissipation, which reduces θJA. In addition, metal in direct contact with the package leads from metal traces, through holes, ground, and power planes, reduces the θJA. ESD CAUTION |
类似零件编号 - AD9251-40EBZ |
|
类似说明 - AD9251-40EBZ |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |