数据搜索系统,热门电子元器件搜索 |
|
TL2842P 数据表(PDF) 4 Page - Texas Instruments |
|
|
TL2842P 数据表(HTML) 4 Page - Texas Instruments |
4 / 12 page TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038E – JANUARY 1989 – REVISED DECEMBER 1999 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended operating free-air temperature range, VCC = 15 V (see Note 4), RT = 10 kΩ, CT = 3.3 nF (unless otherwise specified) reference section PARAMETER TEST CONDITIONS TL284x TL384x UNIT PARAMETER TEST CONDITIONS MIN TYP† MAX MIN TYP† MAX UNIT Output voltage IO = 1 mA, TA = 25°C 4.95 5 5.05 4.9 5 5.1 V Line regulation VCC = 12 V to 25 V 6 20 6 20 mV Load regulation IO = 1 mA to 20 mA 6 25 6 25 mV Temperature coefficient of output voltage 0.2 0.4 0.2 0.4 mV/ °C Output voltage with worst-case variation VCC = 12 V to 25 V, IO = 1 mA to 20 mA 4.9 5.1 4.82 5.18 V Output noise voltage f = 10 Hz to 10 kHz, TA = 25°C 50 50 µV Output-voltage long-term drift After 1000 h at TA = 25°C 5 25 5 25 mV Short-circuit output current –30 –100 –180 –30 –100 –180 mA † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. oscillator section PARAMETER TEST CONDITIONS TL284x TL384x UNIT PARAMETER TEST CONDITIONS MIN TYP† MAX MIN TYP† MAX UNIT Oscillator frequency (see Note 5) TA = 25°C 47 52 57 47 52 57 kHz Frequency change with supply voltage VCC = 12 V to 25 V 2 10 2 10 Hz/kHz Frequency change with temperature 50 50 Hz/kHz Peak-to-peak amplitude at RT/CT 1.7 1.7 V † All typical values are at TA = 25°C. NOTES: 4. Adjust VCC above the start threshold before setting it to 15 V. 5. Output frequency equals oscillator frequency for the TLx842 and TLx843. Output frequency is one-half oscillator frequency for the TLx844 and TLx845. error-amplifier section PARAMETER TEST CONDITIONS TL284x TL384x UNIT PARAMETER TEST CONDITIONS MIN TYP† MAX MIN TYP† MAX UNIT Feedback input voltage COMP at 2.5 V 2.45 2.50 2.55 2.42 2.50 2.58 V Input bias current –0.3 –1 –0.3 –2 µA Open-loop voltage amplification VO = 2 V to 4 V 65 90 65 90 dB Gain-bandwidth product 0.7 1 0.7 1 MHz Supply-voltage rejection ratio VCC = 12 V to 25 V 60 70 60 70 dB Output sink current VFB at 2.7 V, COMP at 1.1 V 2 6 2 6 mA Output source current VFB at 2.3 V, COMP at 5 V –0.5 –0.8 –0.5 –0.8 mA High-level output voltage VFB at 2.3 V, RL = 15 kΩ to GND 5 6 5 6 V Low-level output voltage VFB at 2.7 V, RL = 15 kΩ to GND 0.7 1.1 0.7 1.1 V † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. |
类似零件编号 - TL2842P |
|
类似说明 - TL2842P |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |