数据搜索系统,热门电子元器件搜索 |
|
TS5070FN 数据表(PDF) 5 Page - STMicroelectronics |
|
TS5070FN 数据表(HTML) 5 Page - STMicroelectronics |
5 / 32 page TRANSMIT SECTION Name Pin Type TS5070 FN TS5071 N Function Description FSX I 22 15 Transmit Frame Sync. Normally a pulse or squarewave waveform with an 8 kHz repetition rate is applied to this input to define the start of the transmit time-slot assigned to this device (non-delayed data mode) or the start of the transmit frame (delayed data mode using the internal time-slot assignment counter). VFXI I 28 20 Transmit Analog This is a high–impedance input. Voice frequency signals present on this input are encoded as an A–law or µ–law PCM bit stream and shifted out on the selected DX pin. DX0 DX1 0 0 18 19 13 – Transmit Data DX1 is available on the TS5070 only, DX0 is available on all devices. These transmit data TRI–STATE ® outputs remain in the high impedance state except during the assigned transmit time–slot on the assigned port, during which the transmit PCM data byte is shifted out on the rising edges of BCLK. TSX0 TSX1 0 0 20 21 14 – Transmit Time–slot TSX1 is available on the TS5070 only. TSX0 is available on all devices. Normally these opendrain outputs are floating in a high impedance state except when a time–slot is active on one of the DX outputs, when the apppropriate TSX output pulls low to enable a backplane line–driver. Should be strapped to ground (GND) when not used. RECEIVE SECTION Name Pin Type TS5070 FN TS5071 N Function Description FSR I 8 6 Receive Frame Sync. Normally a pulse or squarewave waveform with an 8 kHz repetition rate is applied to this input to define the start of the receive time–slot assigned to this device (non-delayed frame mode) or the start of the receive frame (delayed frame mode using the internal time-slot assignment counter. VFR0 0 2 2 Receive Analog The receive analog power amplifier output, capable of driving load impedances as low as 300 Ω (depending on the peak overload level required). PCM data received on the assigned DR pin is decoded and appears at this output as voice frequency signals. DR0 DR1 I I 10 9 7 – Receive Data DR1 is available on the TS5070 only, DR0 is available on all devices. These receive data input(s) are inactive except during the assigned receive time–slot of the assigned port when the receive PCM data is shifted in on the falling edges of BCLK. TS5070 - TS5071 5/32 |
类似零件编号 - TS5070FN |
|
类似说明 - TS5070FN |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |