2SK2628FS

No. A1323-5/5

SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using

products at values that exceed, even momentarily, rated values (such as maximum ratings, operating

condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor

Co.,Ltd. products described or contained herein.

SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all

semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures

or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give

rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,

adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but

are not limited to protective circuits and error prevention circuits for safe design, redundant design, and

structural design.

Upon using the technical information or products described herein, neither warranty nor license shall be

granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any

third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third

party's intellectual property rights which has resulted from the use of the technical information and products

mentioned above.

Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed

for volume production.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the

SANYO Semiconductor Co.,Ltd. product that you intend to use.

In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are

controlled under any of applicable local export control laws and regulations, such products may require the

export license from the authorities concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system, or

otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.

PS

This catalog provides information as of October, 2008. Specifications and information herein are subject

to change without notice.

Note on usage : Since the 2SK2628FS is a MOSFET product, please avoid using this device in the vicinity

of highly charged objects.