数据搜索系统,热门电子元器件搜索 |
|
ST7FLCD1 数据表(PDF) 10 Page - STMicroelectronics |
|
ST7FLCD1 数据表(HTML) 10 Page - STMicroelectronics |
10 / 95 page General Information ST7FLCD1 10/95 1.5 External Connections Figure 3 shows the recommended external connections for the device. The VPP pin is only used for programming or erasing the Flash memory array, and must be tied to a 10 K pulldown resistor for normal operation. The 10 nF and 0.1 µF decoupling capacitors on the power supply lines are a suggested EMC performance/cost tradeoff. The external RC reset network (including the mandatory 1K serial resistor) is intended to protect the device against parasitic resets, especially in noisy environments. Unused I/Os should be tied high to avoid any unnecessary power consumption on floating lines. An alternative solution is to program the unused ports as inputs with pull-up. Figure 3: Recommended External Connections VPP VDD VSS OSCIN OSCOUT RESET VDD 0.1µF + See Clocks Section VDD 0.1µF 0.1µF EXTERNAL RESET CIRCUIT Or configure unused I/O ports Unused I/O 10nF 4.7K 10K by software as input with pull-up VDD 1K 10K |
类似零件编号 - ST7FLCD1_05 |
|
类似说明 - ST7FLCD1_05 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |