Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099

Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com

Characteristic Data and Specifications are subject to change without notice.

©2008 Mimix Broadband, Inc.

Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept

their obligation to be compliant with U.S. Export Laws.

February 2008 - Rev 06-Feb-08

Page 6 of 6

13.5-17.0/27.0-34.0 GHz Doubler

QFN, 3X3mm

X1007-QT

Handling and Assembly Information

Ordering Information

CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the

environment. For safety, observe the following procedures:

Do not ingest.

Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these

by-products are dangerous to the human body if inhaled, ingested, or swallowed.

Observe government laws and company regulations when discarding this product. This product must be discarded in

accordance with methods specified by applicable hazardous waste procedures.

Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or

systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life

support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain

life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be

reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or

system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its

safety or effectiveness.

Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible

with high volume solder installation. The package is a low-cost plastic package. Vacuum tools or other suitable pick and place

equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder

connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF

performance degradation, but reduced reliability and life of the product due to thermal stress.

Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental

requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant

components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is

100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as

well as higher temperature (260°C reflow) “Pb Free” processes.

Part Number for Ordering

Description

XX1007-QT-0G00

Matte Tin plated RoHS compliant QFN 3x3 16L surface mount package in bulk quantity

XX1007-QT-0G0T

Matte Tin plated RoHS compliant QFN 3x3 16L surface mount package in tape and reel

XX1007-QT-EV1

XX1007-QT Evaluation Board

We also offer this part with alternative plating. Please contact your regional sales manager for more information regarding different

plating types.

Typical Reflow Profiles

Reflow Profile

Ramp Up Rate

Activation Time and Temperature

Time Above Melting Point

Max Peak Temperature

Time Within 5 ºC of Peak

Ramp Down Rate

SnPb

3-4 ºC/sec

60-120 sec @ 140-160 ºC

60-150 sec

240 ºC

10-20 sec

4-6 ºC/sec

Pb Free

3-4 ºC/sec

60-180 sec @ 170-200 ºC

60-150 sec

265 ºC

10-20 sec

4-6 ºC/sec

Caution: ESD Sensitive

Appropriate precautions in handling, packaging

and testing devices must be observed.

Proper ESD procedures should be followed when handling this device.