数据搜索系统,热门电子元器件搜索 |
|
MC145583DW 数据表(PDF) 5 Page - LANSDALE Semiconductor Inc. |
|
MC145583DW 数据表(HTML) 5 Page - LANSDALE Semiconductor Inc. |
5 / 7 page LANSDALE Semiconductor, Inc. ML145583 www.lansdale.com Page 5 of 7 Issue A PIN DESCRIPTIONS VCC Digital Power Supply (Pin 27) This digital supply pin is connected to the logic power supply. This pin should have a not less than 0.33 µF capacitor GND. GND Ground (Pin 2) Ground return pin is typically connected to the signal ground pin of the EIA–232–E connector (Pin 7) as well as to the logic power sup- ply ground. VDD Positive Power Supply (Pin 23) This is the positive output of the on–chip voltage tripler and the positive power supply input of the driver/receiver sections of the device. This pin requires an external storage capacitor to filter the 50% duty cycle voltage generated by the charge pump. VSS Negative Power Supply (Pin 5) This is the negative output of the on–chip voltage tripler/inverter and the negative power supply input of the driver/ receiver sections of the device. This pin requires an external storage capacitor to filter the 50% duty cycle voltage generated by the charge pump. RIMON Ring Monitor Circuit (Pin 4) The Ring Monitor Circuit will convert the input level on Rx1 pin at standby mode and output on the RIMON pin. STB Standby Mode (Pin 6) The device enters the standby mode while this pin is connected to the logic high level. During the standby mode, driver and receiver output pins become high–impedance state. In this condition, supply current ICC is below 5 µA (typ). C5+, C5–, C2+, C2–, C1+, C1– Voltage Tripler and Inverter (Pins 1, 3, 28, 26, 25, 24) These are the connections to the internal voltage tripler and invert- er, which generate the VDD and VSS voltages. Rx1, Rx2, Rx3, Rx4, Rx5 Receive Data Inputs (Pins 7, 8, 9, 11, 13) These are the EIA–232–E receive signal inputs. A voltage between + 3 and + 25 V is decoded as a space, and causes the corresponding DO pin to swing to GND (0 V). A voltage between – 3 and – 25 V is decoded as a mark, and causes the DO pin to swing up to VCC. DO1, DO2, DO3, DO4, DO5 Data Outputs (Pins 22, 21, 20, 18, 16) These are the receiver digital output pins, which swing from VCC to GND. Output level of these pins is high impedance while in stand- by mode. DI1, DI2, DI3 Data Inputs (Pins 19, 17, 15) These are the high impedance digital input pins to the drivers. Input voltage levels on these pins must be betweenVCC and GND. Tx1, Tx2, Tx3 Transmit Data Output (Pins 10, 12, 14) These are the EIA–232–E transmit signal output pins, which swing toward VDD and VSS. A logic 1 at a DI input causes the cor- responding Tx output to swing toward VSS. The actual levels and slew rate achieved will depend on the output loading (RL/CL). The minimum output impedance is 300 Ω when turned off. SWITCHING CHARACTERISTICS 50% DI1 – DI3 (INPUT) + 3 V 0 V tf 10% 90% tr tDPHL tDPLH VOL VOH Tx1 – Tx3 (OUTPUT) 50% Rx1 – Rx5 (INPUT) + 3 V 0 V tf 10% 90% tr tRPHL tRPLH VOL VOH DO1 – DO5 (OUTPUT) STB (INPUT) Tx1 – Tx3 (OUTPUT) + 3.3 V 0 V VOL VOH + 1.5 V + 1.5 V + 5 V + 5 V – 5 V – 5 V tDAZ tDZA HIGH Z STB (INPUT) DO1 – DO5 (OUTPUT) + 3.3 V 0 V VOL VOH + 1.5 V + 1.5 V 90% 90% 10% 10% tRAZ tRZA HIGH Z RECEIVER DRIVER RECEIVER DRIVER |
类似零件编号 - MC145583DW |
|
类似说明 - MC145583DW |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |