数据搜索系统,热门电子元器件搜索 |
|
TEA1099H 数据表(PDF) 8 Page - NXP Semiconductors |
|
TEA1099H 数据表(HTML) 8 Page - NXP Semiconductors |
8 / 40 page 1999 Apr 08 8 Philips Semiconductors Product specification Speech and handsfree IC with auxiliary inputs/outputs and analog multiplexer TEA1099H Fig.4 Main DC voltages. handbook, full pagewidth 0.07 0.06 8 6 2 0 0 0.01 voltages (V) 0.02 0.05 MICS VDD VBB SLPE LN Iline (A) 0.04 0.03 4 FCA049 EXTERNAL SUPPLY (PINS ESI AND VBB) The TEA1099H can be supplied by the line as well as by external power sources (voltage or current sources) that must be connected to pin ESI. The IC will choose which supply to use according to the voltage it can provide. A voltage supply on ESI is efficient only if its value is greater than the working voltage of the internal VBB voltage stabilizer. Otherwise the IC continues to be line powered. The current consumed on this source is at least equal to the internal consumption. It increases with the voltage difference between the value forced on ESI and the working voltage of the internal stabilizer. The excess current compared to the internal consumption becomes then available for other purposes such as supplying a loudspeaker amplifier. The voltage source should not exceed 6 V. If the value of the external voltage source can be lower than the working voltage of the internal stabilizer, an external diode is required to avoid reverse current flowing into the external power supply. In case of current source, the voltage on VBB and ESI depends on the current available. It is internally limited to 6.6 V. The current source should not exceed 140 mA. VDD SUPPLY FOR MICROCONTROLLER (PIN VDD) The voltage on VDD supply point follows the voltage on VBB with a difference typically equal to 250 mV and is internally limited to 3.35 V. This voltage is temperature compensated. This supply point can provide a current up to 3 mA typically. Its internal consumption stays low (a few 10 nA) as long as VDD does not exceed 1.5 V (see Fig.5). An external voltage can be connected on VDD with limited extra consumption on VDD (typically 100 µA). This voltage source should not be lower than 3.5 V or higher than 6 V. VBB and VDD can supply external circuits in the limit of currents provided either from the line or from ESI, taking into account the internal current consumption. |
类似零件编号 - TEA1099H |
|
类似说明 - TEA1099H |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |