Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the

Cree logo are registered trademarks of Cree, Inc.

5

CLD-CT023.000

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

Fax: +1.919.313.5778

www.cree.com/ledlamps

Mechanical Dimensions

All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.

An epoxy meniscus may extend about 1.5 mm down the leads.

Burr around bottom of epoxy may be 0.5 mm max.

Notes

RoHS Compliance

The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or

otherwise restricted materials in this product are below the maximum concentration values (also referred to as the

threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-

tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(RoHS), as amended through April 21, 2006.

Vision Advisory Claim

Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.

2/5

Format #: COTCO-D-074 REV.4

Document No. SPE/LC374TWN1-35Q-A1

Rev. No.

04

A

D

A

°C

Items

Symbol

Absolute maximum

Rating

Unit

Forward Current

25

mA

Peak Forward Current*

100

mA

Reverse Voltage

5

V

Power Dissipation

100

mW

Operation Temperature

-40 ~ +95

°C

Storage Temperature

-40 ~ +100

°C

Lead Soldering

Temperature

Max.260

(3mm from the base of the epoxy bulb)

*pulse width <=0.1msec duty <=1/10

Items

Symbol

Condition

Min.

Typ.

Max.

Unit

Forward Voltage

---

3.4

4.0

V

Forward Voltage

1.7

---

2.5

V

Reverse Current

---

---

100

A

Luminous Intensity

2130

3800

---

mcd

x

---

0.31

---

---

Chromaticity

Coordinates

y

---

0.32

---

---

50% Power Angle

2

½H-H

---

35

---

deg