数据搜索系统,热门电子元器件搜索 |
|
L6911CTR 数据表(PDF) 5 Page - STMicroelectronics |
|
L6911CTR 数据表(HTML) 5 Page - STMicroelectronics |
5 / 20 page 5/20 L6911C Table 1. VID Settings Device Description The device is an integrated circuit realized in BCD technology. It provides complete control logic and protections for a high performance step-down DC-DC converter optimized for microprocessor power supply. It is designed to drive N-Channel Mosfets in a synchronous-rectified buck topology. The device works properly with Vcc rang- ing from 5V to 12V and regulates the output voltage starting from a 1.26V power stage supply voltage (Vin). The output voltage of the converter can be precisely regulated, programming the VID pins, from 1.3V to 2.05V with 50mV binary steps and from 2.1V to 3.5V with 100mV binary steps, with a maximum tolerance of ±1% over tem- perature and line voltage variations. The device provides voltage-mode control with fast transient response. It includes a 200kHz free-running oscillator that is adjustable from 50kHz to 1MHz. The error amplifier features a 15MHz gain-bandwidth product and 10V/ µsec slew rate which permits high converter bandwidth for fast tran- sient performance. The resulting PWM duty cycle ranges from 0% to 100%. The device protects against over- current conditions entering in HICCUP mode. The device monitors the current by using the rDS(ON) of the upper MOSFET which eliminates the need for a current sensing resistor. The device is available in SO20 package. Oscillator The switching frequency is internally fixed to 200kHz. The internal oscillator generates the triangular waveform for the PWM charging and discharging with a constant current an internal capacitor. The current delivered to the oscillator is typically 50 µA (Fsw=200KHz) and may be varied using an external resistor (RT) connected between RT pin and GND or VCC. Since the RT pin is maintained at fixed voltage (typ. 1.235V), the frequency is varied proportionally to the current sunk (forced) from (into) the pin. In particular connecting it to GND the frequency is increased (current is sunk from the pin), according to the following relationship: Connecting RT to VCC=12V or to VCC=5V the frequency is reduced (current is forced into the pin), according to the following relationships: VID4 VID3 VID2 VID1 VID0 Output Voltage (V) VID4 VID3 VID2 VID1 VID0 Output Voltage (V) 01 11 1 1.30 11111 Output Off 01 11 0 1.35 11110 2.1 01 10 1 1.40 11101 2.2 01 10 0 1.45 11100 2.3 01 01 1 1.50 11011 2.4 01 01 0 1.55 11010 2.5 01 00 1 1.60 11001 2.6 01 00 0 1.65 11000 2.7 00 11 1 1.70 10111 2.8 00 11 0 1.75 10110 2.9 00 10 1 1.80 10101 3.0 00 10 0 1.85 10100 3.1 00 01 1 1.90 10011 3.2 00 01 0 1.95 10010 3.3 00 00 1 2.00 10001 3.4 00 00 0 2.05 10000 3.5 f S 200kH z 4.94 10 6 ⋅ R T k Ω () ------------------------- + = |
类似零件编号 - L6911CTR |
|
类似说明 - L6911CTR |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |