数据搜索系统,热门电子元器件搜索 |
|
CDB5511 数据表(PDF) 6 Page - Cirrus Logic |
|
CDB5511 数据表(HTML) 6 Page - Cirrus Logic |
6 / 22 page CDB5510/11/12/13 6 DS337DB2 2. SOFTWARE 2.1 Installation Procedure 1) Turn on the PC, running Windows 95 or 98. 2) Insert the Installation Diskette #1 into the PC. 3) Select the Run option from the Start menu. 4) At the prompt, type: A:\SETUP.EXE <enter>. 5) The program will begin installation. 6) If it has not already been installed on the PC, the user will be prompted to enter the direc- tory in which to install the CVI Run-Time Engine. The Run-Time Engine manages exe- cutables created with LabWindows/CVI. If the default directory is acceptable, select OK and the Run-Time Engine will be installed there. 7) After the Run-Time Engine is installed, the user is prompted to enter the directory in which to install the Eval5510/11/12/13 soft- ware. Select OK to accept the default direc- tory, or choose an alternate directory. 8) Once the program is installed, it can be run by double clicking on the Eval5510/11/12/13 icon, or through the Start menu. Note: The software is written to run with 640 x 480 res- olution; however, it will work with 1024 x 768 resolution. If the user interface seems to be a little small, the user might consider setting the display settings to 640 x 480. (640 x 480 was chosen to accommodate a variety of computers). 2.2 Using the Software At start-up, the title screen appears first (Figure 1). This window contains information concerning the software’s title, revision number, copyright date, etc. Additionally, at the top of the screen is a menu bar which displays user options. Notice, the menu bar item Window is initially disabled. This elimi- nates any conflicts with the mouse or concurrent use of modems. Before proceeding any further, the user is prompted to select the serial communication port. 2.2.1 Selecting the COM Port and Part To initialize a port, pull down option ComPorts from the menu bar and select either COM1 or COM2. Next, the user is prompted to select the ap- propriate part under the Parts menu. After a port is initialized and the correct part is selected, it is a good idea to test the RS-232 link between the PC and the evaluation board. To do this, pull down the Setup menu from the menu bar and select the op- tion TESTRS232. The user is then prompted to set the evaluation board’s test switches to 111 and then reset the board. Once this is done, proceed with the test. If the test fails, check the hardware connection and repeat again. Otherwise, set the test switches back to the correct mode as specified in this docu- ment, and press reset again. 2.2.2 Setup Window Functions To make sure that the software and evaluation board are set up correctly, it is recommended that the user proceed to the Setup Window and test the functionality of the part before proceeding (Figure 2). To access the Setup Window, the user can pull down the Window menu item, or press F1 on the keyboard. The following describes the various op- tions and indicators in the Setup Window. Clocking Options: This pull-down menu allows the user to select the type of clock that will be used with the ADC, so that the software knows what to expect from the microcontroller. Selecting from this menu also gives the user the DIP switch op- tions that they must set on the evaluation board. There are three options available on this menu: CS5511/13 Internally Clocked - This option means that a CS5511 or CS5513 is being used, and the mi- crocontroller will only provide an SCLK when clocking data from the ADC. Be sure that no jump- er is installed on HDR7 of the CDB5510 when this |
类似零件编号 - CDB5511 |
|
类似说明 - CDB5511 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |