数据搜索系统,热门电子元器件搜索 |
|
MC14066BDTR2 数据表(PDF) 3 Page - ON Semiconductor |
|
MC14066BDTR2 数据表(HTML) 3 Page - ON Semiconductor |
3 / 12 page MC14066B http://onsemi.com 3 ELECTRICAL CHARACTERISTICS –55 _C 25 _C 125 _C Characteristic Symbol VDD Test Conditions Min Max Min Typ (4.) Max Min Max Unit SUPPLY REQUIREMENTS (Voltages Referenced to VEE) Power Supply Voltage Range VDD — 3.0 18 3.0 — 18 3.0 18 V Quiescent Current Per Package IDD 5.0 10 15 Control Inputs: Vin = VSS or VDD, Switch I/O: VSS v VI/O v VDD, and ∆Vswitch v 500 mV (5.) — — — 0.25 0.5 1.0 — — — 0.005 0.010 0.015 0.25 0.5 1.0 — — — 7.5 15 30 µA Total Supply Current (Dynamic Plus Quiescent, Per Package ID(AV) 5.0 10 15 TA = 25_C only The channel component, (Vin – Vout)/Ron, is not included.) (0.07 µA/kHz) f + IDD Typical (0.20 µA/kHz) f + IDD (0.36 µA/kHz) f + IDD µA CONTROL INPUTS (Voltages Referenced to VSS) Low–Level Input Voltage VIL 5.0 10 15 Ron = per spec, Ioff = per spec — — — 1.5 3.0 4.0 — — — 2.25 4.50 6.75 1.5 3.0 4.0 — — — 1.5 3.0 4.0 V High–Level Input Voltage VIH 5.0 10 15 Ron = per spec, Ioff = per spec 3.5 7.0 11 — — — 3.5 7.0 11 2.75 5.50 8.25 — — — 3.5 7.0 11 — — — V Input Leakage Current Iin 15 Vin = 0 or VDD — ± 0.1 — ±0.00001 ± 0.1 — ± 1.0 µA Input Capacitance Cin — — — — 5.0 7.5 — — pF SWITCHES IN AND OUT (Voltages Referenced to VSS) Recommended Peak–to– Peak Voltage Into or Out of the Switch VI/O — Channel On or Off 0 VDD 0 — VDD 0 VDD Vp–p Recommended Static or Dynamic Voltage Across the Switch (5.) (Figure 1) ∆Vswitch — Channel On 0 600 0 — 600 0 300 mV Output Offset Voltage VOO — Vin = 0 V, No Load — — — 10 — — — µV ON Resistance Ron 5.0 10 15 ∆Vswitch v 500 mV (5.), Vin = VIL or VIH (Control), and Vin = 0 to VDD (Switch) — — — 800 400 220 — — — 250 120 80 1050 500 280 — — — 1200 520 300 Ω ∆ON Resistance Between Any Two Channels in the Same Package ∆Ron 5.0 10 15 — — — 70 50 45 — — — 25 10 10 70 50 45 — — — 135 95 65 Ω Off–Channel Leakage Current (Figure 6) Ioff 15 Vin = VIL or VIH (Control) Channel to Channel or Any One Channel — ±100 — ± 0.05 ±100 — ±1000 nA Capacitance, Switch I/O CI/O — Switch Off — — — 10 15 — — pF Capacitance, Feedthrough (Switch Off) CI/O — — — — — 0.47 — — — pF 4. Data labeled “Typ” is not to be used for design purposes, but is intended as an indication of the IC’s potential performance. 5. For voltage drops across the switch ( ∆Vswitch) > 600 mV ( > 300 mV at high temperature), excessive VDD current may be drawn; i.e. the current out of the switch may contain both VDD and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded. (See first page of this data sheet.) |
类似零件编号 - MC14066BDTR2 |
|
类似说明 - MC14066BDTR2 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |