TC94A23F datasheet(7/20 Pages) TOSHIBA

部件名	TC94A23F

功能描述	Single-chip CD Processor with Built-in Controller

Download	20 Pages

Scroll/Zoom	100%

制造商	TOSHIBA [Toshiba Semiconductor]

网页	http://www.semicon.toshiba.co.jp/eng

标志

7 / 20 page

TC94A23F

2002-02-06

7

Number

Symbol

Pin Name

Function and Operation

Remarks

21~24

P1-0~P1-3

I/O port 1

4-bit CMOS I/O port.

Input/output can be set for each bit by

program.

The pins can be set to be pulled-up or

pulled-down by program. Thus, they can be

used as key input pins. When the pins are set

to I/O port input, Clock Stop mode and Wait

mode can be released, according to the

change in input to the pins.

25

P3-0

I/O port 3

26~28

P3-1/ADin1

~

P3-3/ADin3

I/O port 3

/A/D analog voltage

input

29

P4-0/ADin4

/BUZR

I/O port 4

/A/D analog voltage

input/buzzer output

5-bit CMOS I/O port.

Input/output can be set for each bit by

program.

P3-1 and P4-0 pins are also used as built-in

6-bit 4-channel A/D converter analog input

pins.

The built-in A/D converter uses successive

approximation. The conversion time is 6

instruction cycles (280

ms) when the 75 kHz

crystal oscillator is used; 198

ms when the 4.5

MHz crystal oscillator is used; 180

ms when

the 16.9344 MHz crystal oscillator is used.

A/D analog input can be set for each pin by

program. The internal power supply (MVDD) is

used as the reference voltage.

The P4-0 pin is also used as the buzzer

output pin.

One of four frequencies: 0.75, 1, 1.5, and 3

kHz, can be selected for buzzer output. The

buzzer is output at the selected frequency in

one of four modes: Continuous, single-shot,

10 Hz intermittent, and 10 Hz intermittent at 1

Hz interval.

Settings for the A/D converter and buzzer,

and their control can be performed by

program.

33

P2-0/EMPHin

34

P2-1/ HSO in

35

P2-2/LRCKin

36

P2-3/DATAin

I/O port 2

/1-bit DAC input

37

IN1/BCKin

89

IN2/ (VPP)

General-purpose

input port/1-bit DAC

input (VPP input)

I/O port 2 is a 4-bit CMOS I/O port.

IN1 and IN2 are a 2-bit general-purpose input

port.

Input/output can be set for each bit of I/O port

2 by program.

I/O port 2 and the IN1 pins can be switched to

1-bit DAC input pins by the CD command to

support shock-proofing. In this case, the I/O

port must be set to input.

With the OTP version, the IN2 pin is also used

as the program power supply pin.

MVDD

RIN1

MVDD

To A/D

converter

Input

instruction

MVDD

类似零件编号 - TC94A23F

制造商	部件名	数据表	功能描述
Toshiba Semiconductor	TC94A29FAG	282Kb / 20P	TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
Toshiba Semiconductor	TC94A29FB	282Kb / 20P	TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

More results

类似说明 - TC94A23F

制造商	部件名	数据表	功能描述
Toshiba Semiconductor	TC94A09F	270Kb / 19P	Single-Chip CD Processor with Built-in Controller
	TC94A39FAG	274Kb / 20P	Single-Chip CD Processor with Built-in Controller (CD-DX)
	TC9248BF	622Kb / 15P	CD SINGLE CHIP PROCESSOR WITH BUILT-IN 1BIT DA CONVERTER
	TC9284BF	651Kb / 16P	CD SINGLE CHIP PROCESSOR WITH BUILT-IN 1BIT DA CONVERTER
	TC9263AF	649Kb / 16P	CD SINGLE-CHIP PROCESSOR
Sony Corporation	CXD2545Q	5Mb / 102P	CD DIGITAL SIGNAL PROCESSOR WITH BUILT-IN DIGITAL SERV
Toshiba Semiconductor	TC9283F	743Kb / 16P	CD SINGLE-CHIP PROCESSOR
Mitsubishi Electric Sem...	M65824AFP	182Kb / 23P	CD PLAYER DIGITAL SIGNAL PROCESSOR WITH BUILT-IN DAC
Sony Corporation	CXD2585Q	962Kb / 127P	CD Digital Signal Processor with Built-in Digital Servo
Sony Corporation	CXD3008Q	1,003Kb / 131P	CD Digital Signal Processor with Built-in Digital Servo